Turn Scheduled Slideshows On Or Off; Changing The Decorative Frame; Copying Files From A Computer Or Flash Drive; Connect To A Windows Computer - Pandigital UG-SA-W_A User Manual

Table of Contents

Advertisement

2.
Use the Arrow buttons to select Set On/Off Schedule and press Enter. The Set Schedule page opens with the
Hours field for the Weekdays Turn on at highlighted.
3.
Use the Up or Down arrow to set the hour you want scheduled slideshows to start, then use the right arrow to
move to the minutes field, set the minutes in the same manner as the hours, and then move the highlight to the
AM/PM field.
4.
Use the Up or Down arrow button to choose AM or PM.
5.
Set the time you want the slideshow to end in the same manner.
6.
Press the Enter button when Always OFF is highlighted if you don't want to play scheduled slideshows on
weekdays. The field now reads Set Turn-On Time. Press the Enter button to schedule weekday slideshows.
7.
You can set different times for scheduled slideshows on the weekends in the same manner.
8.
When you are happy with the settings, press the Exit button to save them and return to the Calendar/Clock page.
Tum Scheduled Slideshows On or Off
After you set create slideshow schedules, you need to turn slideshow scheduling on to use the schedules.
1. With the Calendar/Clock displayed, press the Setup button.
2.
Choose Start Scheduled ON/OFF, to turn the scheduling on or off.
Changing the Decorative Frame
The Digital Photo Frame has interchangeable decorative frames.
1. To change the frame, remove two screws on the back of the frame. Lift the unit from the frame.
2.
Place the unit into the new frame, replace the screw, and finger-tighten.
Copying Files from a Computer or Flash Drive
You can connect the Digital Photo Frame to a Windows or Macintosh computer to copy files to the built-in memory.
You can also connect a USB flash drive to the frame to copy files.
Connect to a Windows Computer
To copy files from between your computer and the Digital Photo Frame do the following:
1.
Plug in and turn on the Digital Photo Frame.
2.
Connect the small end of the USB cable to the Mini USB port on the Digital Photo Frame.
3.
Connect the Larger end of the USB cable to a USB port on your computer.
13

Advertisement

Table of Contents
loading

Table of Contents