Copy Several Photos - Pandigital PAN80-2 User Manual

7. Choose Copy Photo then submenu Copy Selected and press ENTER. The
message displays "Finish" on the lower right screen. Note: the default
setting is "Optimized" for copy photo into Digital Picture Frame built-in
memory.
8. Press EXIT to return to the Thumbnails screen.
Use the PanTouch Menu to copy a photo from a memory card to the built-in
memory.
1. Press the SETUP button from the Home screen.
2. Select Media Source.
3. Use the Arrow buttons to highlight the desired memory card.
4. Press the SELECT button to select the card.
5. Press Back from PanTouch menu to go back to Home screen.
6. Highlight Photo and press ENTER. The Thumbnails screen opens.
7. Use the Arrow Buttons to highlight the photo you want to copy.
8. Press the SELECT button on the highlighted photo.
9. Press the COPY SEL to copy selected file.
10. Once the copying is complete, a "Finished!" message display in the middle
of the screen.

Copy Several Photos

Use the Remote Control to copy photos from an external (e.g. memory card)
media source to built-in memory.
1. Press the EXIT button until the Home screen opens.
2. Press SETUP on the remote control, an on-screen menu open, then use
arrow key to highlight Select Media option, then press ENTER, submenu
open.
3. Use arrow key to select desired memory, then Press ENTER. Press EXIT
key twice to return to Home screen.
4. Select Photo and press Enter, The Photo Thumbnails screen opens.
5. Use the Arrow Buttons to highlight the photo you want to copy.
6. Use the "+" button to select the photo. A check mark should appear at the
middle of the thumbnail frame of the selected photo. Use the "-" button to
de-select it if you want to.
16