Turn Scheduled Slideshows On Or Off; Changing The Decorative Frame - Pandigital PAN7206 User Manual

field, set the minutes in the same manner as the hours, and then
move the highlight to the AM/PM field.
4. Use the Up or Down arrow button to choose AM or PM.
5. Set the time you want the slideshow to end in the same manner.
6. Press the Enter button when Always OFF is highlighted if you don't
want to play scheduled slideshows on weekdays. The field now
reads Set Turn-On Time. Press the Enter button to schedule
weekday slideshows.
7. You can set different times for scheduled slideshows on the
weekends in the same manner.
8. When you are happy with the settings, press the Exit button to save
them and return to the Calendar/Clock page.

Turn Scheduled Slideshows On or Off

After you set create slideshow schedules, you need to turn slideshow
scheduling on to use the schedules.
1. With the Calendar/Clock displayed, press the Setup button.
2. Choose Start Scheduled ON/OFF, to turn the scheduling on or off.
After the scheduled control is turned on, any user operations, e.g.
pressing remote keys, or insertion/removal of memory cards, will cancel
the scheduled control immediately. Scheduled slideshow can also be
turned on during the slideshow by pressing Setup, select Start
Scheduled ON/OFF menu item and press Enter key.

Changing the Decorative Frame

Depending on the model, your Digital Photo Frame may come with
interchangeable decorative frames.
1. To change the frame, remove two screws on the back of the frame
and lift the unit from the frame.
2. Place the unit into the new frame, replace the screws, and finger-
tighten.
18