EVERPURE
CLARIS FLOW METER
®
EV4339-31
MONITORING SYSTEM FOR CLARIS FILTER CARTRIDGE SYSTEMS
Claris Flow Meter: EV4339-31
INSTALLATION TIPS
If mounting display to a wall, securely
connect the display to the wall using
suitable screws or mounting hardware.
Shut-off valve must be installed upstream
of the filter.
Refer to Installation, Operation &
Maintenance manual for flow meter start
up and programing.
FOODSERVICE
EV4331-31 SPECIFICATION SHEET
APPLICATIONS
Vending
Hotel
Restaurant
Cafe
FEATURES • BENEFITS
The programming and display unit
provides the following information:
• Residual capacity of installed
filter cartridge
• Filtrate volume of the last five (5)
installed filter cartridges
• Operation time of the last five (5)
• Total filtrate volume since flow meter
installation
OPERATION TIPS
Change Claris Cartridge when its
pre-calculated water volume has been
reached or at least once per year.
Change cartridges when capacity
is reached.
The CLARIS Flow Meter has been
developed specifically to monitor the
usage rate of the CLARIS Water Filter
System and to determine the optimum
cartridge replacement interval. After
setting the programming unit to monitor
the specific filter size, the Claris Flow
Meter continually measures the filtrate
volume to calculate and display the
remaining filtration capcity in liters.
Once the available filtration capacity is
exhausted or the maximum operation
time has been reached the display unit
indicates the filter cartridge replacement.
SIZING
Operating Pressure: 29 - 116 psi (2 - 8 bar)
Flow Rate: 2.64 - 26.4 gph (10 -100 Lph)