Panasonic WJ-ND200 Setup Instructions page 28

Setup items
I Language
Select the display language for the web browser from
the following.
JAPANESE/ENGLISH
I Time & Date
Adjust the current time and date.
Select numbers for year, month, day, hour and minute,
and click the [SET] button.
Important:
• Recording will not be performed for around 4 sec-
onds just after applying the time and date settings.
• Live images will turn to black screen and recording
will not be performed for around 4 seconds just after
applying the time and date settings even by shifting
to/from summertime (daylight savings).
I Port Setup
Perform the settings for the following items for each
port.
[DHCP]
Select ON or OFF to determine whether or not to use
the DHCP server. Select "ON" to obtain an IP address,
a subnet mask and a gateway from the DHCP server.
Set to "OFF" when entering the addresses above manu-
ally.
ON: Uses the DHCP server.
OFF: Does not use the DHCP server.
Important:
A different subnet should be set for each port.
[IP Address]
When "OFF" is selected for "DHCP", enter an IP
address. For this unit, enter 4 units from the decimal
numbers (0-255) according to the network configuration.
[Subnet Mask]
Enter a subnet mask according to the network configu-
ration when OFF is selected for "DHCP".
[Gateway]
Enter the IP address of the gateway according to the
network environment when "OFF" is selected for
"DHCP".
28
[Line Speed]
The following are available for "Line Speed".
AUTO: Line speed will be applied automatically.
10-HALF: 10 Mbps semi duplex
10-FULL: 10 Mbps full duplex
100-HALF: 100 Mbps semi duplex
100-FULL: 100 Mbps full duplex
Note:
When the setup menu is closed after changing the
line speed, the unit will automatically restart.
I Camera Auto Registration
The unit will search cameras and register the detected
cameras automatically. Determine how to register IP
addresses of cameras.
Register the IP address automatically given by this
unit to a detected camera: When a camera is
detected, the unit will give an IP address to the
detected camera and register it.
Register the IP address set with a detected camera:
When a camera is detected, the unit will register the
IP address of the detected camera.
Notes:
• When "Camera Auto Registration" is carried out, the
other login users will be forcibly logged out.
• Recordings currently being carried out on this unit
will stop in the process of "Camera Auto
Registration".
• "Camera Auto Registration" is unavailable for cam-
eras on a different subnet.
• Depending on the camera model, the unit cannot
detect them for their security when 20 minutes have
passed after the power of the camera is turned on.
Refer to the operating instructions of the camera for
further information.
• The image compression method of the registered
camera will automatically be set to "JPEG" or "M-
JPEG".
• When selecting "Register the IP address automati-
cally given by this unit to a detected camera", the
unit will automatically find an unused IP address and
set it to the detected camera. However, depending
on the network environment, the set IP address may
be already used for the other network device such
as when using the firewall function of Windows
®
.