Table of Contents
Advertisement
Function indicator symbols
Minute minder active
Duration
End time
Child lock active
Heating active
Setting the time
When the appliance is connected to power, the display will show the
hour digits flashing, the minute digits will be illuminated.
•
Use
and
hour digits will now be illuminated and the minutes will be flashing
•
Use
and
the setting. The appliance enters sleep mode and the time set will
be shown
Note: The time can only be set in 24 hour format
Changing the time
The time display can only be changed when no other functions are
being used.
If in sleep mode, press the on/off sensor
Once the display has illuminated, touch and hold
will flash on the display. Touch
flash. You can now proceed to set the time following the steps in the
'Setting the time' section above.
8 | Instruction Manual
to set the hours. Touch
to set the minutes. Touch the
to confirm the setting, the
to wake the appliance up.
again and the digits will start to
sensor to confirm
. The
symbol
Advertisement
Table of Contents
