Function Indicator Symbols; Setting The Time - CDA SL550SS Use And Maintenance

Function indicator symbols

Minute minder active
Duration
End time
Child lock active
Heating active

Setting the time

When the appliance is connected to power, the display will show the
hour digits flashing, the minute digits will be illuminated.
• Use and
hour digits will now be illuminated and the minutes will be flashing
• Use and
the setting. The appliance enters sleep mode and the time set will
be shown
Note: The time can only be set in 24 hour format
Changing the time
The time display can only be changed when no other functions are
being used.
If in sleep mode, press the on/off sensor
Once the display has illuminated, touch and hold
will flash on the display. Touch
You can now proceed to set the time following the steps in the
'Setting the time' section above.
8 | Instruction Manual
to set the hours. Touch
to set the minutes. Touch the
Pyrolitic cleaning
Temperature probe
connected
(SL570 only)
to confirm the setting, the
to wake the appliance up.
again and the digits will start to flash.
sensor to confirm
. The symbol