How To Change The Rear Panel Position - Panasonic AK-HRP900P Operating Instructions Manual

Example of Rack Mount

_How to change the rear panel position

1 Remove the three screws on the
bottom to remove the blank panel.
Blank panel
2 Remove the three screws on the rear
panel to remove the rear panel.
CAMERA I / F
MONITOR OUT
P/T CONT
Y P b P r
* When installing, take care so that the internal wires are not caught by the panel.
Screw
Screw
DC 12V IN
G/L IN TALLY IN BREAKER
3 Install the rear panel on the bottom with
the three screws.
CAMERA I / F
P/T CONT MONITOR OUT
Y P b P r
4 Install the blank panel on the rear side
with the three screws.
Blank panel
Screw
DC 12V IN
G/L IN TALLY IN BREAKER
Screw
19