Table of Contents
Advertisement
How to Connect
Make the connection with power supply to the unit turned off.
≥ Use AW-PS505P (option) as the AC adapter for control panel.
≥ Use a swivel stand, AW-PH300A, AW-PH500, AW-PH600, and an adapter suited for
the swivel stand.
≥ When no swivel stand is used, connect both of the motor-driven zoom lens iris control
cable and remote (zoom/focus) cable to the camera. (see page 13)
≥ When a swivel stand is used, connect the iris control cable to the camera, and the
remote (zoom/focus) cable to the swivel stand. (see the illustration below)
≥ For the connection system of each unit, refer to pages 14 to 16.
≥ Connect the motor-driven zoom
lens iris control cable to the
camera,
and
(zoom/focus control) cable to the
swivel stand. If the motor-driven
zoom lens remote (zoom/focus
control) cable is connected to
the camera, the lens cannot be
controlled.
12
the
remote
To iris connector
Iris control
cable
Remote
(zoom/focus
control) cable
ND/EXT
IN
SDI
I/F
LENSE
I/F
CAMERA
To lens interface
connector
DC12V
CONTROL IN
IN
1394
IP/RP
C S O P
G/L I N
Pb OUT
Pr /SDI
Y/VIDEO
OUT
OUT
B R E A K E R
Z O O M /
F O C U S
1
S D I O U T
2
1 / F
Advertisement
Table of Contents
