Procedure - H3C BX1020B IB Manual

Power-off method
Powering off the switch module from the OM
Web interface
Powering off the switch module from the OM
CLI

Procedure

After the switch module is successfully powered off, the Health LED is off. For more information
about the LEDs, see
Powering off the switch module as the blade enclosure is powered off
The switch module is powered off automatically when the blade enclosure is powered off.
Powering off the switch module from the OM Web interface
1. Log in to the OM Web interface. For more information, see "Logging in to the OM from the Web
interface."
2. Click Switch module.
3. Select a target switch module.
4. Click Power State, and click Power Off.
5. Click OK. As shown in
Figure 5 Powering off the switch module
Figure 6 The switch module has been powered off
Powering off the switch module from the OM CLI
1. Log in to the OM CLI. For more information, see "Logging in to the OM from the CLI."
2. Execute the
<OM>io 1 cpu off
3. Execute the
1 has been powered off.
Table 4.
Figure 4, the switch module has been powered off.
command in user view to power on the switch module in slot 1.
io 1 cpu off
command in user view to verify that the switch module in slot
display io list
Application scenario
Both the blade enclosure and switch module have been
powered on and the switch module is operating correctly.
3