Figure 3 Powering on the switch module
Figure 4 The switch module has been powered on
Powering on the switch module from the OM CLI
1.
Log in to the OM CLI. For more information, see "Logging in to the OM from the CLI."
2.
Execute the
1.
<OM> psu-io on io 1
3.
Execute the
1 has been powered on.
<OM>display io list
Slot : 1
Powering off the switch module
This section describes how to power off the switch module.
Supported power-off methods
Table 8
describes power-off methods supported by the switch module.
Table 9 Power-on methods supported by the switch module
Power-off method
Powering off the switch module as the blade
enclosure is powered off
psu-io on io 1
display io list
Running status
: Normal
UID LED
: Off
PSU
: On
Product name
: BX1020B
CPU usage
: N/A
command in user view to power on the switch module in slot
command in user view to verify that the switch module in slot
Application scenario
N/A
2