Internal Networking; Connections Between Switch Modules And Mezzanine Network Adapters - H3C BX1020B IB Manual

Internal networking

Connections between switch modules and
mezzanine network adapters
Table 5 describes connections between switch modules and mezzanine network adapters.
Table 5 Connections between switch modules and mezzanine network adapters
Blade server model
H3C UniServer B5700 G5
H3C UniServer B5700 G3
H3C UniServer B7800 G3
H3C UniServer B5800 G3
Figure 1 shows the connections between switch modules and half-wide Mezzanine network
adapters.
•
Mezzanine network adapter 1 is connected to switch modules in slot 1 and slot 4.
•
Mezzanine network adapter 2 is connected to switch modules in slot 2 and slot 5.
•
Mezzanine network adapter 3 is connected to switch modules in slot 3 and slot 6.
Figure 1 Connections between switch modules and half-width mezzanine network adapters
Blade
Figure 2 shows the connections between switch modules and full-wide mezzanine network adapters.
•
Mezzanine network adapter 1 and mezzanine network adapter 4 are connected to switch
modules in slot 1 and slot 4.
•
Mezzanine network adapter 2 and mezzanine network adapter 5 are connected to switch
modules in slot 2 and slot 5.
Max number of
supported mezzanine
network adapters
3
3
6
3
Mezz1
Mid-plane
Mezz2
Mezz3
Internal connections
Figure 1
Figure 1
Figure 2
Figure 1
1
2
3
1
The figures show only the
mapping between mezzanine
network adapter slots and
switch module slots. For the
locations of the mezzanine
network adapter slots and
switch module slots, see the
marks on the modules.
4
5
6
ICM