Commonly Used Operations; Logging In To The Om From The Web Interface - H3C BX1020B IB Manual

Commonly used operations

Logging in to the OM from the Web interface

1. Power on the enclosure.
2. As shown in
backup Oms over the LAN. Make sure the PC and the management networks on the OMs are
reachable to each other at Layer 3.
Figure 7 Setting up a configuration environment
PC
3. As shown by callouts 1, 2, and 3 in
for logging in to the OM (https://OM_ip_address), enter the username and password, and then
click Login.
Table 10 Default OM login parameters
Parameter
Management IP address of the OM
Username and password for logging
in to the OM
The data in the table is only an example. Configure the parameters as needed.
Figure 7, connect the Ethernet port on the PC to the MGMT port on the primary and
LAN
Figure 8, launch the browser on your PC, enter the address
Description
•
IP address: 192.168.100.100
•
Subnet mask: 255.255.255.0
•
Username: admin
•
Password: Password@_
1
Enclosure