Panasonic WORKIO DP-8035 Operating Instructions Manual page 80

Function Parameters
For Key Operator
■ ■ ■ ■ ■ Copier Settings
Screen
No.
02 Text Contrast
03 T/P Contrast
01/05
04 Photo Contrast
06 Interleaving Default
07 Page Insertion Default
02/05
08 Cover Mode Default
09 Job Build And SADF Mode
10 Maximum Copy Setting
12 M1, Size
03/05
13 M2, Size
16 Memory Overflow Warning
17 Toner Save Mode (T)
04/05
18 Toner Save Mode (T/P)
19 Toner Save Mode (P)
20 Add New Tandem Desti.
21 Edit Tandem Destination
05/05
22 Delete Tandem Desti.
23 Copier Settings Print
● The Key Operator Password is required before any changes can be made to items on this page.
NOTE
∗
80
Modes
Selects contrast for Text mode.
● 1 ~ 7
Selects contrast for Text/Photo mode.
● 1 ~ 7
Selects contrast for Photo mode.
● 1 ~ 7
Selects OHP interleaving paper.
● Blank, Copy
Selects page insertion.
● Blank, Copy
Selects cover paper.
● F, Blank, F, Copy
FB, Blank, FB, Copy (F: Front, FB: Front + Back)
Enables or disables the use of SADF function.
● No, Yes
Determines whether to limit number of copies
(0-99).
Inputs a size in job memory 1 for frequently
used size.
● X: 5~432/Y: 5~297 mm
(See pages 62-63)
Inputs a size in job memory 2 for frequently used size.
● X: 5~432/Y: 5~297 mm
(See pages 62-63)
Selects the task to perform when memory
overflow occurs.
● Print, Cancel
Selects the toner save in Text mode.
● None, Level 1, Level 2 ∗
Selects the toner save in Photo/Text mode.
● None, Level 1, Level 2 ∗
Selects the toner save in Photo mode.
● None, Level 1, Level 2 ∗
Inputs a new destination to split the copy job.
Edits the split copy job destination.
Deletes the split copy job destination.
Prints the copier settings.
● Stop, Start
"Level 1 or 2" setting consumes less Toner than "None" setting, however, the copy quality will
diminish slightly.
Toner saving is based on the Panasonic 6 % density Test Chart (N910653):
Level 1: Uses approximately 10 % less Toner than None setting.
Level 2: Uses approximately 20 % less Toner than None setting.
Function
Initial
Setting
4
4
4
Blank
Blank
F, Blank
Yes
0
(No limit)
70 x 160 mm
(X) (Y)
95 x 220 mm
(X) (Y)
Print
None
None
None