Margin; Centering - Panasonic WORKIO DP-8035 Operating Instructions Manual

Making Copies
Zoom/Effects
■ ■ ■ ■ ■ Margin
The original can be copied by setting a binding
margin on the edge or in the center of the paper.
NOTE:
● If a part of copied image is missing, change the
Margin Reduction setting to Yes. Refer to "03
Margin Reduction Def." of the Copier Settings.
(See page 73)
● When "OVERLAY" or "FORM OVERLAY" is
selected, the binding margin is also set for the
overlay original.
● If this setting is made when 2-Sided copying is
selected, the print position comes out different
between the front and back side of copy.
■ ■ ■ ■ ■ Centering
The copying image can be centered automatically
on selected paper.
● Remove the originals from the ADF before
selecting the Centering and Image Repeat mode.
An incorrect position detection of the original may
occur when a strong light shines onto the glass
during the Centering and Image Repeat mode.
Also an image which the copier interprets as a
black pattern in the Centering and Image Repeat
modes.
42
1 2
or
1 2
Opening the ADF
● In Centering and
Image Repeat mode,
make copies with the
ADF open more than
45 degrees wide.