Panasonic WORKIO DP-8035 Operating Instructions Manual page 78

Function Parameters
For Key Operator
■ ■ ■ ■ ■ General Settings
Screen
No.
30 Sleep/Shutdown Select
31 Print General Settings
32 Corona Wire Cleaning
07/13
33 MAC Address
34 Address Book Group ID
35 Tandem User Parameter
36 Community Name (1)
37 Community Name (2)
08/13
38 Device Name
39 Device Location
40 Daylight Time
41 Routing Menu Function
09/13
42 Doc. Dist Server Name
43 Doc Dist Server IP
45 Special Paper Tray 3
46 Special Paper Tray 4
10/13
47 Special Paper Tray 5
∗
NOTE
∗∗
∗∗∗
78
Modes
Selects the Sleep/Shutdown mode.
● Sleep, Shutdown
Print out the General Function parameters list.
● Stop, Start
Sets the corona wire cleaning.
● Off, On
Indicates the MAC address.
Inputs group ID for address book. ∗
● 0 ~ 99
Inputs parameter of user machine. ∗
Selects to change the SNMP of Community
Name (1). ∗
● Enables read only.
Selects to change the SNMP of Community
Name (2). ∗
● Enables read/write.
Inputs the device name when necessary. ∗
(For Status Monitor/EtherTalk Machine Name)
Inputs the device location when necessary. ∗
(For Status Monitor)
Set the daylight time according to your local
regulations. ∗∗∗
● No, MAR 2nd, APR 1st
Selects the Document Distribution function. ∗∗
● No, Yes
Inputs the Document Distribution System
routing server name. ∗∗
Inputs the Document Distribution System
routing server IP address. ∗∗
● 3 digits x 4
Sets the Paper Tray for special paper
(Ex.: colored).
● None, Tray 1, Tray 2, Tray 3, Tray 4, LCT, Bypass
Sets the Paper Tray for special paper
(Ex.: colored).
● None, Tray 1, Tray 2, Tray 3, Tray 4, LCT, Bypass
Sets the Paper Tray for special paper
(Ex.: colored).
● None, Tray 1, Tray 2, Tray 3, Tray 4, LCT, Bypass
When Functions No. 34 to 39 are set, cycle the power by turning the Power Switch on the
Left side of the machine OFF and ON.
When the optional Document Distribution System (DA-WR10) is installed.
MAR 2nd: From 2:00 AM 2nd Sunday of March to 2:00 AM 1st Sunday of November.
APR 1st: From 2:00 AM 1st Sunday of April to 2:00 AM Last Sunday October.
● This setting is applied from March 2007. If you select "MAR 2nd" before March 2007, the
daylight time will automatically set to "APR 1st".
Function
Initial
Setting
Sleep
0
MAR 2nd
No
0. 0. 0. 0.
None
None
None