Table of Contents
Advertisement
Installation
(continued)
❏ Installation Procedures (When not using Mounting Collar w)
Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car
7
manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer.
Select mounting screws according to the hole positions and hole shape of the bracket.
t Round Head Screw (5 mmø x 6 mm)
Recycle the Round Head Screws that fixed the transportation brackets for two more
positions.
u Round Head Screw (4 mmø x 3 mm)
4 pieces
y Flat-Head Screw (5 mmø x 6 mm)
Use the supplied Spacer i if mounting hole of your
car is shaped like below.
Mounting Hole
of a Bracket
(in section)
Bracket
t Round Head Screw
i Spacer
(5 mmø x 6 mm)
o Double-Faced Adhesive Tape
Existing Bracket (L) (Bracket originally attached to the car)
To Remove the Unit
q Push the right and left clamp plates outward, one at a time, and pull the unit toward yourself.
w After removing the right and left clamp plates, pull the unit with both hands till it comes out.
q
Push here to
remove the
clamp plates.
* To remove Trim Plate q, pull it from right side to left side.
8
CQ-VD7001N
2 pieces
When using these
mounting holes
4 pieces
t Round Head Screw
(5 mmø x 6 mm)
i Spacer
Existing Bracket (R)
o Double-Faced
Adhesive Tape
w
Connecting the Side Brake (Parking Brake) Connection Lead
Caution
¡For safety, be sure to ask your nearest professional installer to do this connection.
Hand brake
Foot brake
The side brake (parking brake) switch position varies with car model.
For details on the exact location of the side brake (parking brake) switch
in your car, contact your dealer.
SIDE BRAKE
Side Brake (Parking Brake) Connection
Lead (Blue/yellow stripe)
When the side brake (parking brake) lever is
engaged, the unit is grounded by the chassis.
q Attach a Clip Connector !2 to the end of the side
brake (parking brake) connection lead.
Comes up to this point.
Side Brake (Parking Brake)
Connection Lead
(Blue/yellow stripe)
Side brake (parking brake) switch
Brake light
Battery
+
–
!2
Clip Connector
Car chassis
w The Clip Connector !2 is connected to the power
source side lead of the side brake (parking brake)
lever.
Power source side lead
CQ-VD7001N
8
9
Advertisement
Table of Contents
