Primary System Board - HP ProLiant BL45p Maintenance And Service Manual

Primary system board

To remove the component:
Power down the server blade (on page 28).
1.
Remove the server blade (on page 28).
2.
Remove the secondary access panel
3.
Remove the processor air baffle
4.
Remove the fan assembly
5.
Remove all DIMMs ("DIMMs" on page 35).
6.
Remove the FC mezzanine, if installed
7.
Remove the NIC mezzanine, if installed
8.
Remove the I/O signal board
9.
Disconnect all cables connected to the system board
10.
Disengage the power connector from the chassis. Retain the thumbscrews for future use.
11.
Remove the secondary system board
12.
Remove the primary access panel
13.
Remove all hard drives
14.
Remove the power button/LED board cable
15.
Remove the processor air baffle
16.
Remove the fan assembly
17.
Remove the hard drive backplane cable
18.
34).
Remove the hard drive backplane
19.
Remove all DIMMs ("DIMMs" on page 35).
20.
Remove the FC mezzanine, if installed
21.
Remove the NIC mezzanine, if installed
22.
All manuals and user guides at all-guides.com
("Secondary access
("Processor air
("Fan assembly" on page 33).
("Fibre Channel
("NIC
("I/O signal board" on page 37).
("Secondary system
("Primary access
("Hard drive" on page 30).
("Processor air
("Fan assembly" on page 33).
("Hard drive backplane power and data
("Hard drive
("Fibre Channel
("NIC
panel" on page 29).
baffle" on page 32).
mezzanine" on page 36).
mezzanine" on page 36).
("System board components" on page 75).
board" on page 49).
panel" on page 29).
("Power button/LED board
baffle" on page 32).
backplane" on page 34).
mezzanine" on page 36).
mezzanine" on page 36).
Removal and replacement procedures 55
cable" on page 31).
cable" on page