HP ProLiant BL45p Maintenance And Service Manual page 45

All manuals and user guides at all-guides.com
Press down firmly until the processor installation tool clicks and separates from the processor, and
3.
then remove the processor installation tool.
Close the processor retaining bracket and the processor retaining latch.
4.
Clean the old thermal grease from the heatsink with the alcohol swab. Allow the alcohol to
5.
evaporate before continuing.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
6.
distribution:
CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
Removal and replacement procedures 45