Check, Change Or Delete A Program - Panasonic Diga DMR-T6070 Operating Instructions Manual

4
Press [ENTER].
MESSAGES SCHEDULE
FAVORITES RECORD
Sat 1:00pm NWBG
87
NWBG
SP
HDD
REMOVE
1:00 1:55
Sat 2:00pm Dodzilla
Sat 3:00pm Bull house
Sat 3:30pm Be switched Weekly
4/3 4:00pm Baseball
Repeat steps 1–4 to program other recordings.
≥As long as the setting is not changed, the program is
recorded to the HDD in the recording mode selected by the
unit. To change the setting
setting, steps 3–4.
5
Press [TV GUIDE].
Returns to the television screen.
≥The unit is not off. To save power, turn the unit off by
pressing [Í DVD POWER].
≥When using the cable TV box, make sure the cable TV box is
turned on.
∫ To cancel recording when recording has already
begun
Press [∫], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the main unit for more than 3
seconds to stop recording.

Check, change or delete a program

1
Press [PROG/CHECK].
MESSAGES SCHEDULE
FAVORITES
RECORD
Sat 1:00pm NWBG
Sat 2:00pm Dodzilla
Sat 3:00pm Bull house
Sat 3:30pm Be switched Weekly
4/3 4:00pm Baseball
2
Press [3, 4] to select the program.
Channel or program name (a program name that was set
for timer recording using TV Guide On Screen
or VCR Plusi system that was listed in the program list)
Sat 1:00pm NWBG
87
NWBG
SP
HDD
REMOVE
1:00 1:55
Recording mode ( page 17)
Recording drive
∫ To change the recording frequency
Press [CHAPTER] (Green).
∫ To change the time, recording mode and
recording drive
Press [ENTER]. ( page 19, To change the setting, step 4)
LISTINGS
Once
R
FREQUENCY INFO.
Once
R
Weekly
R W
R W
Once R
page 19, To change the
LISTINGS
SET TIMER
Once
R
Once
R
Weekly
R
W
R W
Once R
TM system
Once
R
FREQUENCY INFO.
Frequency ( page 19, 20)
∫ To delete the program
Press [DUBBING] (Blue).
∫ To exit the screen
Press [TV GUIDE].
Returns to the television screen.
≥The unit is not off. To save power, turn the unit off by pressing
[Í DVD POWER].
∫ When there is a duplicate or overlapping
program timer recording
The program timer recording that was set last is recorded. None of
the program that was set earlier is recorded even if there is only
partial overlapping.
Program timer recordings that are not recorded are highlighted in
grey.
Time
Not recorded
Programs set earlier
Program set last
Notes on timer recording
≥"F" lights on the unit's display to indicate that the unit is in timer
recording standby.
≥"F" flashes when the unit cannot go to timer recording standby.
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even
when recording or when playing.
≥Timer recordings do not begin while transferring (dubbing) in
normal speed mode ( page 37).
≥When you program successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the ending of the earlier program (approximately 15
seconds). In addition, when recording to DVD-R, the unit
cannot record the part at the beginning of the later program
(approximately 15 seconds).
Program Program
Recorded Recorded
Not recorded
≥If you set DST (Daylight Saving Time) to ON when manually
setting the clock ( page 11), timer recording may not work
when summer switches to winter and vice versa.
∫ Relief Recording
When the recording drive is set to "DVD" for timer recording and
if the program will not fit onto the disc, the recording drive will be
changed to the "HDD" automatically.
≥If there is no disc in the tray or the disc cannot be recorded on
or when timer recording starts while transferring (dubbing), the
recording drive will be changed to the HDD.
≥The Direct Navigator shows which programs were relief-
recorded (" " is displayed.)(
≥If the time remaining on the HDD is insufficient, as much of the
program as possible will be recorded onto the HDD.
Not recorded
Recorded
Not recorded [DVD-R]
page 24).
RQT7559
21