Signal Distribution - Clarion XC6 Series Owner's Manual & Installation Manual

Speaker Wiring Diagrams Con't
4 Ohm Mono - Two Dual 4 Ohm Voice Coil Subwoofers
4 BRIDGED
CH1 CH2
Two Dual 4 Ohm Voice Coil Subwoofers

Signal Distribution

The XC6440 is quite complex in terms of its ability to distribute signals through
the amplifier. The combination of the Input Selection Switch and Mode Select
Switch allow the amp to be used as a 2-Channel, 3-Channel or 4-Channel amp
using one or two pairs of signal inputs.
The XC6640 is capable of providing signal distribution to all six channels from 1,
2 or 3 pair(s) of inputs.
As there many different possible configurations, block diagrams have been
provided to explain the internal connectivity and signal routing for each model of
amplifier.
Notes:
On the XC6440, the Remote Level Control functions only when channels 1 & 2
are put in Low-Pass mode. On the XC6640, Remote Level Control functions only
when channels 5 & 6 are put in Low-Pass mode.
If you have questions regarding the configuration of the amplifier for your
application, please do not hesitate to contact the Clarion dealer you purchased
the amplifier from.
11