Related Manuals for Clarion XC2510
Summary of Contents for Clarion XC2510
- Page 1 Owner’s manual & Installation manual Mode d’emploi et manuel d’installation Manual de instrucciones y de instalación XC 251 0 XC 241 0 XC 2110 XC AMPLIFIERS AMPLIFICATEURS XC AMPLIFICADORES XC...
- Page 2 We have made product registration simple with our easy to use website. The registration form is short and easy to complete. Once you’re registered, we can keep you informed of important product information. Register at www.clarion.com - it’s easy to keep your Clarion product up to date. XC2510/XC2410/XC2110...
-
Page 3: Table Of Contents
Manual del Propietario (Spanish) ........38 XC2510/XC2410/XC2110... -
Page 4: Features
1. FEATURES The Clarion XC2510, XC2410, and XC2110 amplifiers fit a variety of system configurations and provide these features: • Full frequency response with low distortion and exceptional signal-to-noise performance. • Advanced circuitry design provides bridgeable outputs for use in a variety of applications. -
Page 5: Precautions
• Do not pour liquid or poke foreign objects into the unit. Water and humidity will damage internal circuitry. • If the unit becomes wet, turn off all power and ask your authorized Clarion dealer to clean or service the unit. -
Page 6: Controls
3. CONTROLS XC2510 controls and input connections White (+) White/Black (-) FR Left (CH1) Gray (+) Front Line Input Gray/Black (-) CH1 (White) FR Right (CH2) Front Left Green (+) Gray Green/Black (-) CH2 (Red) RR Left (CH3) Front Right... - Page 7 9. Bass Boost control LT), CH2 (Front RT), CH3 (Rear LT), 10. Gain control CH4 (Rear RT), Subwoofer 11. Low-Pass X-Over control 3. Front gain control 12. Status indicator light 4. Front Hi-Pass X-Over control 5. Rear gain control XC2510/XC2410/XC2110...
-
Page 8: Operations
These switches are equipped with 12dB per octave electronic filters for precise frequency attenuation with minimal phase distortion. Connecting a source unit without RCA outputs The speaker level inputs provide connections for a high-level stereo source. Use them if your source unit does not have RCA outputs. XC2510/XC2410/XC2110... -
Page 9: Care And Maintenance
Mounting precautions If you lack the necessary skills, do not install the amplifier yourself. See your authorized Clarion dealer for installation recommendations. • This unit is exclusively for applications with a negative ground, 12V power supply. • This unit requires additional mobile audio components for proper operation. -
Page 10: Wiring Precautions
Adding an external fuse protects the electrical system from short circuits that can result in a fire. • Do not open the case. There are no user-serviceable parts inside. If you require assistance, consult your Clarion dealer or an authorized Clarion service center. XC2510/XC2410/XC2110... -
Page 11: Power And Speaker Connections
Power and speaker connections XC2510 Speaker output Power connector Front Left (CH1) Ground (-) Battery (+12V) Front Right (CH2) Rear Left (CH3) Battery (+12V) Rear Right (CH4) Ground (-) Subwoofer (CH5) Amplifier Turn On Power Input Fuse 40A Speaker Output... -
Page 12: Applications
Applications Mono subwoofer system This application shows the amplifier in mono operation to drive a subwoofer. Subwoofer XC2510/XC2410/XC2110... -
Page 13: Bridged Mode
Each bridged channel of the XC2410 can drive one (1) full-range 4-ohm speaker. Bridged #2 Bridged #1 Purple/Black White Gray/Black (+) Green Bridged Power Output Refer to the Specifications in Section 8 (Pg. 17) of the manual for additional information on Bridge Mode. XC2510/XC2410/XC2110... -
Page 14: Setting The Gain
Single amplifier combination system In this application, the XC2510 is used to drive a full system. Gray Black Purple White/Black FR Left White Gray/Black FR Right Gray Green/Black RR Left Green Purple/Black RR Right Purple Setting the gain After completing the installation, follow these steps to set the gain control and perform the final system checks. -
Page 15: Setting The Crossover
Clarion amplifiers feature fully-adjustable crossovers. 1. The XC2410 is equipped with high-pass crossovers, the XC2110 is equipped with low-pass crossovers, and the XC2510 is equipped with high-pass crossovers on channels 1-4, and low-pass crossover on channel 5. 2. Using the Freq (Hz) control, select the frequency. -
Page 16: Troubleshooting
Audio cycles on and off • Thermal protection circuits are shutting the amplifier off. • Check the location for adequate ventilation. Consult an authorized Clarion audio dealer. Distorted audio • Gain is not properly set or the speaker cones are damaged.