Log Shows; How To Login As A Log User - Furuno FELCOM501 Operator's Manual

5.11

Log Shows

You can display five logs: notification log, voice call log, data connection log, registra-
tion log, and remote access log. When the storage capacity of a log is reached, the
oldest entries are erased in order.
Notification
Voice Call
Data Connection
Registration
Remote Access
Note 1: The voice and data communication values shown on the terminal display and
within terminal logs are for indicative purposes only. These values should not be uti-
lized for billing or billing comparison purposes.
Note 2: The latest 100 entries for any log are shown. To view all the entries of a log,
save the log to a CSV file. A log stores up to 1000 entries.
An event log can be forwarded to a PC that has the syslog application installed (see
section 6.11).
5.11.1

How to login as a log user

To login as a log user, use the following procedure.
1. Click the [Login] icon.
The following pop-up menu appears.
2. Input "Log" in the [Username] box and "Lg1234567890" in the [Password] box.
"Lg1234567890" is the default password. To change the password, see x.x.x.
3. Click the [Login] button.
The [Log] menu appears in the menu bar.
4. To log out, click the [Login] icon.
The [Log] menu disappears from the menu bar.
Note 1: You can also logout automatically by closing your Web browser.
Note 2: This login procedure is abbreviated in the following sections.
Log Capacity for entries
1000 for each log
5. WEB INTERFACE
No. of entries displayable
100 entries for each log
5-27