Table of Contents
Advertisement
8
Electrical installation
8
Electrical installation
8.1
Preparing for installation
Danger!
e
Risk of death from electric shock!
Touching live connections may cause seri-
ous personal injury.
> Switch off the power supply.
> Secure the power supply against being
switched back on again.
Danger!
e
Risk of death from electric shock as a
result of an improper electrical connec-
tion!
An improper electrical connection may neg-
atively affect the operational safety of the
boiler and result in material damage or per-
sonal injury.
> The electrical installation must be car-
ried out by a suitably qualified compe-
tent person who is responsible for com-
plying with the existing standards and
guidelines.
> Connect the boiler in accordance with BS
7671 (IEE Regulations).
> For IE: Please observe the latest edition
of the ETCI regulations (Electro-Technical
Council for Ireland).
> Earth the boiler.
30
8.2
Opening/closing the electronics box
Opening the electronics box
> Remove the front casing from the boiler
(¬ section 4.8).
3
4
8.1 Opening the back wall of the electronics box
> Fold the electronics box (1) forwards.
> Undo the 4 clips of the rear cover (2) of the electronics
box from the brackets (3) at the rear and sides of the
electronics box.
> Fold up the cover.
Closing the electronics box
> Close the rear panel on the electronics box.
> Push in the panel until it clicks into place in the clips.
> Fold up the electronics box.
> Push the right and left clips of the box against the side
panels on the boiler until they click into place.
> Attach the front casing of the boiler
(¬ section 4.8).
Installation and maintenance instructions ecoTEC plus 0020134833_01
1
2
Advertisement
Table of Contents
