Setting Procedure - Panasonic PT-D9610U Operating Instructions Manual

Using the RS-232C connectors (continued)
RS-232C settings

Setting procedure

MENU
AUTO SETUP
LENS
PICTURE
POSITION
OPTION
SIGNAL LIST
TEST PATTERN
MENU :
SUB MENU : ENTER
EXIT : MENU
OPTION
ID : nnn
SETTING : nnn
LAMP RUNTIME
NORMAL : nnn
HIGH : nnn
REMAIN : nnn
SET RUNTIME : nnn
LAMP POWER : nnn
CONTRAST MODE : ＊ ＊
MENU :
SELECT :
EXIT : MENU
RS-232C SETTING
(RS-232C IN)
BAUD RATE : 9600bps
PARITY : EVEN
(RS-232C OUT)
BAUD RATE : 9600bps
PARITY : EVEN
VPS SYSTEM : SLAVE
GROUP : -
PARITY : MASTER
MENU :
SELECT :
EXIT : MENU
• The basic commands for external control using RS-232C are given on the following next page.
Pin specifications of RS-232C connector
RS-232C terminal
pin No.
5
4 3 2 1
9 8 7 6
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN (
Press the ENTER button. ... The OPTION screen will be displayed.
Press the UP ( ) and DOWN (
Press the ENTER button. ... The RS-232C SETTING screen will be displayed.
Press the UP ( ) and DOWN (
parameter.
Press the LEFT ( ) and RIGHT (
Press the MENU button three times.
• The on-screen display will disappear and the screen will return to the normal
state.
RS-232C IN
●
Pin No. Name Functions
unassigned
1 T R I
data transmission
2 R D
data reception
3 S D
N C
4 N C
G N D
5 F G
unassigned
6 T R O
demand for transmission
7 R S
acceptance transmission
8 C S
N C
9 N C
) arrow buttons to select OPTION.
) arrow buttons to select RS-232C SETTING.
) arrow buttons to select the communication
) arrow buttons to change the setting.
RS-232C OUT
●
Name
Pin No.
1 T R O
2 R D
3 S D
4 N C
5 F G
6 T R I
7 C S
8 R S
9 N C
Functions
unassigned
data reception
data transmission
N C
G N D
unassigned
acceptance transmission
demand for transmission
N C
73