Adjusting The Edge Blending - Panasonic PT-D9610U Operating Instructions Manual

Adjusting the edge blending

The projector is equipped with a function to blend edges that may appear on the screen during multi-screen use.
Adjustment procedure
MENU
AUTO SETUP
LENS
PICTURE
POSITION
OPTION
SIGNAL LIST
TEST PATTERN
MENU :
SUB MENU : ENTER
EXIT : MENU
POSITION
SHIFT
SIZE
BLK
CLOCK PHASE
INPUT RESOLUTION
CLAMP POSITION
KEYSTONE
EDGE BLENDING
SELECT :
ADJUST : ENTER
EXIT : MENU
EDGE BLENDING
UPPER : OFF ＊＊＊
LOWER : OFF ＊＊＊
LEFT : OFF ＊＊＊
RIGHT : OFF ＊＊＊
MARKER : OFF
SELECT :
ON/OFF :
ADJUST : ＋ −
EXIT : MENU
The best position is where
these lines (marker) overlap
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN (
Press the ENTER button. ... The POSITION screen will be displayed.
Press the UP ( ) and DOWN (
Press the ENTER button. ... The EDGE BLENDING screen will be displayed.
Press the UP ( ) and DOWN (
to blend.
• If blending the upper part : set UPPER to ON.
• If blending the lower part : set LOWER to ON.
• If blending the left part : set LEFT to ON.
• If blending the right part : set RIGHT to ON.
Press the LEFT ( ) and RIGHT(
Adjust the correction area using the control level buttons ( + and − ).
• Used when displaying adjustment marker.
Select MARKER using the UP (
Select ON and OFF using the LEFT (
NOTE
Adjustment marker
The image-positioning marker is displayed when the MARKER is
turned ON.
A green line is displayed to the top and left of the screen, and a red
line is displayed to the bottom and right of the screen. The position
where the red and green lines overlap is the best position for
combining projectors.
Caution:
Be sure to set the correction width to the same value for the two
projectors to be combined. If projectors have different values, the best
blending of edges cannot be achieved.
) arrow buttons to select POSITION.
) arrow buttons to select EDGE BLENDING.
) arrow buttons to select designate the area
) arrow buttons to turn ON and OFF.
) and DOWN ( ) arrow buttons.
) and RIGHT( ) arrow buttons.
67