Table of Contents
Advertisement
Checking Application Details
Use the procedure below to check the details of an application.
1
Press the System Menu key.
2
Press [System] and then [Next] of Optional Function.
NOTE:
If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
Select the application you want to check the details of and press [Detail].
You can now view detailed information on the selected application.
Accessibility Display (Enlarged Touch Panel Display)
Touch panel characters and key displays can be enlarged. Use the numeric keys to select items and proceed
to the next screen.
NOTE:
Accessibility can be used only with Copying and Sending registered on the Quick Setup screen.
To set functions other than those displayed in the accessibility screens, you must return to the original display.
Press the Accessibility Display key again.
Ready to copy.
Auto
100%
Paper
Zoom
Selection
2-sided
2 in 1
>>2-sided
Duplex
Combine
Status
Press the Accessibility Display key when in the Copy
or Send (i.e. the Copy or Send key indicator is On).
Enlarged keys or characters appear on the touch panel.
Copies
Operation can also be made by pressing any numeric
Quantity
key corresponding to the number displayed. (e.g. Press
Normal 0
the 2 key to adjust zoom.)
Density
Follow the instructions on the screen for subsequent
operations.
Off
Staple
08/08/2009
10:10
8-76
Default Setting (System Menu)
Advertisement
Table of Contents
