Table of Contents
Advertisement
" One-Touch Dialer
(fl)
5
Press
6
Enter a phone number, up to 22 digits.
≥Each time you press (CLEAR), a digit is
erased. To erase all of the digits, press and
hold (CLEAR).
≥To move the cursor, press (fi) or (fl).
(›)
7
Press
(fl)
8
Press
≥A beep sounds.
≥To store other numbers, repeat from step 4.
≥To exit the programming mode, press (EXIT).
≥If a pause is required for dialing, (PAUSE) can be stored in a phone number
counting as one digit (p. 57) in step 6.
≥You can exit the programming mode any time by pressing (EXIT).
To erase a stored number
Repeat steps 1 through 5 ¤ press and hold
are erased ¤
Dialing
(Base\Unit)
1
Press the required DIRECT button
(DIRECT3))
≥If 3 beeps sound, you have not stored the phone numbers in the DIRECT
buttons. Store the number.
≥The DIGITAL SP-PHONE indicator lights.
≥The stored number is dialed.
≥Numbers stored in the base unit can only be dialed by the base unit.
≥You can also dial the stored number by pressing (DIGITAL\SP-PHONE) or lifting
the handset then pressing the DIRECT button.
48
(Yes key).
(Next key).
(Save key).
(Next key) ¤
(›)
.
(CLEAR)
(fl)
(Save key)
.
((DIRECT1)
21
4
1234567890¢P
21
4
1234567890¢P
=Edit
1=Save
3
1234567890¢P
Save DIRECT2
until all of the digits
(DIRECT2)
,
or
=Next
=Next
Advertisement
Table of Contents
