Table of Contents
Advertisement
Date and Time
Make sure the base unit and cordless handset are not being used.
(FUNCTION/EDIT)
1
Press
(fl)
2
Press
(Yes key) at "Date and time".
3
Enter the current date (year, month, and
day) using 4-digit numbers.
(Ex. To set Apr. 15, 2002, enter "2002"
and "0415".)
(›)
4
Press
(Next key).
5
Enter the current time (hour and minute)
using a 4-digit number.
(Ex. To set 9:30, enter "0930".)
6
Select "AM" or "PM" by pressing
(›)
7
Press
(Next key).
(fl)
8
Press
(Save key).
≥A beep sounds.
≥The clock starts working.
≥If 3 beeps sound, the setting is not correct.
Start again from step 3.
≥To exit the programming mode, press (EXIT) .
≥You can exit the programming mode any time by pressing (EXIT).
≥In step 5, you cannot enter numbers greater than 12. Do not use military time.
(To set 13:00 hours, enter "0100", and select "PM" by pressing ($).)
≥If you enter a wrong number in step 3 or step 5, press (fi) or (fl) to move the
cursor to the incorrect number. Enter the correct number.
For assistance, please call: 1-800-211-PANA(7262)
(Base\Unit)
.
($)
.
1Date and time
Save DIRECT#
1=Yes
4 3
Date:2002.01.01
0-9=Date
=Next
4 3
4
Date:2002.04.15
0-9=Date
=Next
4 3
4
Time:12:00AM
0-9=Time
=Next
¢=AM/PM
4
Time:09:30AM
0-9=Time
=Next
¢=AM/PM
4
Time:09:30PM
0-9=Time
=Next
¢=AM/PM
4
Date:2002.04.15
Time:09:30PM
=Edit
1=Save
3
Date:2002.04.15
Time:09:30PM
"
2 1
2 1
2 1
2 1
2 1
13
Advertisement
Table of Contents
