Special Features - Panasonic KX-TG2208 Operating Instructions Manual

3

Special Features

3-A Automatic Security Code Setting
Each time you place the handset on the base unit, the unit
automatically selects one of a million security codes. These codes
help prevent the unauthorized use of your telephone line by another
cordless telephone user.
3-B Handset Locator
You can locate the handset or page the handset user with beep
tones from the base unit.
1 Press [HANDSET LOCATOR] on the base unit.
≥The Talk/Ringer and Ringer indicators on the handset and the
IN USE indicator on the base unit flash and the handset
beeps for 1 minute.
2
To stop paging, press [HANDSET LOCATOR] again or
press [OFF] on the handset.
3-C Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press [ ] (TONE) before entering access numbers which require
tone dialing.
≥The dialing mode changes to tone. You can enter numbers to
access an answering service, electronic banking service, etc.
When you hang up, the mode will return to pulse.
3-D For Call Waiting Service Users
Press [FLASH/CALL WAIT] if you hear a call-waiting tone while
talking.
≥The first call is put on hold and you can answer the second call.
≥To return to the first caller, press [FLASH/CALL WAIT] again.
≥Call waiting service cannot be used when a parallel connected
telephone is in use.
≥If this function does not operate properly, consult your telephone
company for details.
4
Recharge
When the RECHARGE indicator
flashes or the unit beeps intermittently,
place the handset on the base unit for
about 6 hours to recharge the battery.
≥If you DO NOT recharge the handset
A nickel metal hydride battery that is recyclable
powers the product you have purchased. Please call
1-800-8-BATTERY for information on how to recycle
this battery.
Battery information
After your Panasonic battery is fully charged:
≥The battery operating time may vary depending on usage
≥Clean the charge contacts of the handset and the base unit
≥If the battery is fully charged, you do not have to place the
≥The battery cannot be overcharged.
You can hang the handset on your belt or pocket using the included
belt clip.
To attach the belt clip
For assistance, please call: 1-800-211-PANA(7262)
Things You Should Know
4-A Battery
battery for more than 15 minutes, the
RECHARGE indicator will continue to
flash.
Battery replacement:
If you cleaned the charge contacts and fully charged the battery,
but after a few telephone calls, the RECHARGE indicator
flashes, the battery needs to be replaced. Please order a new
Panasonic HHR-P513 (N4HHEPA00001) battery at the
telephone number shown on section 1-A. To replace the battery,
see section 1-C, step 2.
Operation
While in use (TALK)
While not in use (Standby)
conditions and ambient temperature.
with a soft, dry cloth once a month. Clean more often if the
unit is subject to grease, dust or high humidity. Otherwise the
battery may not charge properly.
handset on the base unit until the RECHARGE indicator flashes.
This will maximize the battery life.
4-B Belt Clip
RECHARGE
Indicator
Operating time
Up to about 5 hours
Up to about 11 days
To remove the belt clip