Table of Contents
Advertisement
3
Speed Dialer
PROGRAM
TALK Indicator
(TALK)
AUTO
Memory Station
Numbers
(PAUSE)
5
Special Features
5-A For Call Waiting Service Users
Press
if you hear a call-waiting tone while talking.
(FLASH)
•The first call is put on hold and you can answer the second call.
•To return to the first caller, press
•If this function does not operate properly, consult your telephone company
for details.
5-B Automatic Security Code Setting
Whenever you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help
prevent the unauthorized use of your telephone line by another cordless
telephone user.
5-C Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press
before entering access numbers which require tone dialing.
(TONE)
•The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the
mode will return to pulse.
•Access numbers entered after pressing
redialing.
3-A Storing Phone Numbers in Memory
You can store up to 10 phone numbers in the handset. The
dialing buttons ((0) to (9)) function as memory stations. The TALK
indicator light must be off before programming.
1
Press PROGRAM
•The TALK indicator flashes.
2
Enter a phone number up to 22 digits.
3
Press AUTO
Ü
4
Press a memory station number (
•A beep sounds.
•To store other numbers, repeat steps 1 through 4.
•If a pause is required for dialing, press
3-B Dialing a Stored Number
\ AUTO
Press
(TALK)
•If your line has rotary or pulse service, any access numbers stored after pressing
again.
(FLASH)
will not be included when
(TONE)
.
á
.
to
(0)
where needed. Pressing
(PAUSE)
\ the memory station number (
Ü
5-D How to Use the PAUSE Button
(For Analog PBX Line/Long Distance Service Users)
We recommend you press
a PBX or to access a long distance service.
Example: Line access number
\
(9)
(PAUSE)
•Pressing
(PAUSE)
misdialing when you redial or dial a stored number.
•Pressing
(PAUSE)
between numbers.
5-E Handset Locator
You can locate the handset or page the handset user with beep tones.
1
Press
(HANDSETÒLOCATOR)
•The IN USE/CHARGE indicator flashes and the handset beeps for 1
minute.
2
To stop paging, press
twice on the handset.
(TALK)
If you misdial
Press PROGRAM
Start again from step 1.
To erase a stored number
Press PROGRAM
the memory station number ((0) to (9))
for the phone number to be erased.
• A beep sounds.
Memory sticker
Use the included memory
sticker as a name or
).
(9)
phone number index for
the stored numbers. Attach
the sticker to the unit or
in a convenient place.
counts as one digit (5-D).
(PAUSE)
to
).
(0)
(9)
(TONE)
if a pause is required for dialing with
(PAUSE)
(PBX)
(9)
\
Phone number
once creates a 3.5 second pause. This prevents
more than once increases the length of the pause
on the base unit.
(HANDSETÒLOCATOR)
Section 3
á
to end storing.
á
Ü
AUTO
1
6
2
7
3
8
4
9
5
0
will not be dialed.
again or press
Advertisement
Table of Contents
