Installation Procedure - Subaru H001SFJ800 Installation Manual

Smart engine start
Table of Contents

Advertisement

Available languages

Available languages

Installation Procedure

SES ECU Preparation and Installation
1.
Clean the area indicated on the topside of the Glove
Box Inner Cover.
2.
Attach the Double-Sided tape to the Glove Box
Inner Cover as shown.
• Clean attachment surface using isopropyl alcohol and
cleaning towel.
• To achieve maximum bond strength of Tape, the
attachment surface temperature must be between
68°F-110°F (20°C-43°C) upon application.
• Verify that the Double-sided tape is firmly attached.
3.
Attach the Foam Tape to the SES ECU as shown.
• Clean attachment surface using isopropyl alcohol and
cleaning towel.
- 6 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

H001sfj830

Table of Contents