Subaru H001SFJ800 Installation Manual page 24

Check B
Yes
Are connectors I and H on the wiring diagram (page 33) connected? Is the connector plugged in properly?
Yes
Check the signal for HOOD using the wiring harness checks (page 34). Was the problem solved?
No
No
Check the car by using the SSM. Are there any problems found?
No
Replace the hood SW and register again.
Is the hood SW installed?
Try to register again. Was it solved?
- 24 -
No
Install the hood SW.
No
Connect them.
Yes
Troubleshooting completed.
Yes
Troubleshooting completed.
Yes
Fix the car problem first.