Registration Procedure - Subaru H001SFJ800 Installation Manual

Registration Procedure

PS
1. Open the Hood and leave it open throughout the
DS
registration procedure.
• Doors can remain open during registration.
2. Temporarily reconnect 2 Negative Battery Terminals.
• Do not touch the Positive Battery Terminal with the
Negative Battery Terminal.
3. With foot off the brake pedal, Press the "ENGINE
START STOP" button twice to switch the ignition on.
4. Remove the Tape securing the Main Harness's 1P
SES Diagnostic Connectors.
5. Connect the 1P SES Diagnostic Connectors.
6. Register the SES ECU using the procedure on
the next page.
- 16 -