Advertisement
01
START vehicle for 15 seconds.
OFF
ACC
ON START
START
START
ENGINE
START
STOP
02
Press and hold the brake pedal.
03
Press and release the module's programming
button. (OR if the remotes are already
programmed to the vehicle, press and hold the
start button of the remote for 2.5 seconds.)
04
Wait, LED 2 will fl ash GREEN. (See the Module
Diagnostics page)
05
Release the brake pedal.
06
Module Programming Procedure completed.
Patent No. US 8,856,780 CA 2759622
Automotive Data Solutions Inc. © 2019
TACH PROGRAMMING PROCEDURE - 1 OF 1
FT-DC3-LC
PAGE 4 OF 12
• 20190702
www.idatalink.com
Advertisement
