Table of Contents
Related Manuals for Firstech 2WT13R-SF
Summary of Contents for Firstech 2WT13R-SF
- Page 1 User Manual By Firstech LLC, Version: 1.0 Applicable to the following remote(s); 2WT13R-SF 2Way 3Button LCD Remote Model Name FCC ID IC Number 2WT13R-SF VA5RCJ500-2WLR 7087A-2WRCJ500LR ANT-2WSF VA5ANH500-2WLF 7087A-2WANH500LF WWW.COMPUSTAR.COM...
-
Page 2: Fcc Compliance
For ANT-2WSF: This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. RF Specification 2WT13R-SF : 907 ㎒ ~ 919 ㎒ (7CH) DSSS ANT-2WSF : 907 ㎒ ~ 919 ㎒ (7CH) DSSS / 125 ㎑ LF transmitter... -
Page 3: Warranty Coverage
Introduction Thank you for purchasing a Firstech system for your vehicle. Please take a minute to review this entire manual. Note that this manual applies to the 2 Way 3 Button Liquid Crystal Display Remote (2WT13R-SF) whether you purchased the ALARM IT, START IT, or MAX IT system. There are certain features listed in this manual that may not be available for your system. -
Page 4: Quick Reference
Quick Reference Remote Maintenance – Battery Charging The 2WT13R-SF comes with a rechargeable battery. Use the included power adapter and micro USB cable to charge your remote. First, locate the micro USB port on the top of your remote. Connect your micro USB cable to your computer or USB power adapter. -
Page 5: Function Button Menu
Function Button Menu Button Duration Description Half second Move to the left of the remote menu 2.5 seconds The remote menu moves to LCD View. Half second Remote menu selection and operation. 2.5 seconds The remote menu exits manually. Half second Move to the right of the remote menu 2.5 seconds The remote menu moves to Power down. - Page 6 Changes the temperature readout from Fahrenheit to Celsius. Tempurature If the temperature setting is set to off, the temperature is not displayed. Displays the electrical product number REMOTE ID of the remote. Switch the remote product to power POWER Down down mode.
- Page 7 Proximity Proximity On/Off Auxiliary Extender Button Table Button Duration Description Half second Auxiliary 1 Double Tap Auxiliary 7 2.5 seconds Auxiliary 3 Half second Auxiliary 5 Double Tap Accesses Remote Menu. 2.5 seconds Auxiliary 6 Half second Auxiliary 2 2.5 seconds Auxiliary 4 Description of antenna module installation position <<...
-
Page 8: Remote Coding / Programming Routine
Remote Coding / Programming Routine IMPORTANT: Every Firstech remote must be coded to the system prior to performing any operations. All remotes must be coded at the same time. Programming 2 Way 4 Button Remotes: STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the Acc &... -
Page 9: Remote Start Shutdown Error Codes
Remote Start Shutdown Error Codes If the remote start sequence has been completed and the vehicle shuts down, the vehicle’s parking lights will flash 4 times, pause then flash again with the error code. Tap button 4 on 2 Way remotes to initiate the shutdown error codes. -
Page 10: Limited Lifetime Warranty
Limited Lifetime Warranty Firstech, LLC Warrants to the original purchaser that this product shall be free of defects in material and workmanship under normal use and circumstances for the period of time that the original owner of this product owns the vehicle in which it is installed; except that the remote controller unit for the period of one year from the date of installation to the original owner of this product.