One-Touch Dialer; Storing A Phone Number In The Direct Button - Panasonic KX-TC1851B Operating Instructions Manual

One-Touch Dialer

A phone number stored in the
touch operation.
Storing a Phone Number in the DIRECT
Button
Make sure the handset is in the standby mode.
(FUNCTION/EXIT/CH)
1 Press
(›)
2 Press
points to "Program".
FWD/EDIT (fl)
3
Press
4 While the arrow points to "Save
DIRECT#", press
5 Enter a phone number, up to 48 digits.
≥Each time you press (CLEAR) the digit to the
left of the cursor is erased. To erase all of the
digits, press and hold (CLEAR).
≥The last 32 digits number you entered will be
displayed. To confirm the remaining number,
press BACK (fi) or FWD/EDIT (fl).
(›)
6
Press
≥If you want to edit the entered number, press
(‹) (Edit key) and return to step 5.
FWD/EDIT (fl)
7 Press
≥A beep sounds.
≥To return to the standby mode, press
(FUNCTION/EXIT/CH).
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
≥If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number counting as one digit (p. 44) in step 5.
30
(DIRECT)
(‹)
or repeatedly until the arrow
(Yes key).
FWD/EDIT (fl)
(Next key).
(Save key).
button can be dialed with a one-
.
(Yes key).
Ringer volume
1Program
1=Yes
4 3
1Save DIRECT#
Set flash time
1=Yes
4 3
=Next
21
4
1234567890123456
7890123456789012
=Next
21
4
1234567890123456
7890123456789012
=Edit
1=Save
3
1234567890123456
7890123456789012
Save DIRECT#