Table of Contents
Advertisement
(FUNCTION/EXIT/CH)
1
Press
2
While the arrow points to "Save
directory", press
key).
≥The display shows the number of stored items
in the directory.
3
Enter a name, up to 15 characters, with the
dialing buttons, BACK
(fl)
.
≥See the steps for entering names and symbols
(p. 34).
≥If a name is not required, press (›) (Next
key) and go to step 5.
(›)
4
Press
(Next key).
5
Enter a phone number, up to 22 digits.
≥Each time you press (CLEAR) the digit to the
left of the cursor is erased. To erase all of the
digits, press and hold (CLEAR).
(›)
6
Press
(Next key).
FWD/EDIT (fl)
7
Press
≥A beep sounds.
≥The display will return to step 2. You can continue storing other items after
pressing FWD/EDIT (fl) (Yes key).
≥To return to the standby mode, press (FUNCTION/EXIT/CH).
≥If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number counting as one digit (p. 44) in step 5.
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
≥If the display shows "Directory full" in step 2, the display will return to
step 1. Press (FUNCTION/EXIT/CH) to exit the list. To erase other stored items
from the directory, see page 39.
.
FWD/EDIT (fl)
(Yes
(fi)
or FWD/EDIT
(Save key).
1Save directory
Voicemail dial
1=Yes
4 3
Directory=
20 items
Enter name
=Next
21
4
Enter name
Tom Jones
=Next
21
4
Enter phone no.
0987654321
=Next
21
4
Tom Jones
0987654321
1=Save
"
33
Advertisement
Table of Contents
