Table of Contents
Advertisement
One-Touch Dialer
Storing Phone Numbers in Memory
You can store up to 20 phone numbers in the one-touch auto dial buttons
(10 numbers in UPPER memory locations, 10 numbers in LOWER
memory locations).
Do not press any one-touch auto dial buttons before storing to prevent
misoperation.
Make sure that a call is not put on hold.
(PROGRAM)
To store in an UPPER memory location
It is recommended that you program an emergency number in the
EMERGENCY button.
(PROGRAM)
1
Press
2
Enter a phone number, up to 22 digits.
≥If you enter a wrong number, press
(PROGRAM) and start again from step 1.
3
Press one of the one-touch auto dial
buttons.
≥A long beep sounds.
≥The unit will return to the standby mode.
≥If 3 beeps sound, the number entered in step 2 may be over 22 digits.
Press (PROGRAM) to return to the standby mode, and start again from
step 1.
≥If a pause is required for dialing, press (PAUSE) where needed. Pressing
(PAUSE) counts as one digit (p. 21).
18
(EMERGENCY)
One-touch auto dial buttons
(SP-PHONE/HEADSET) and Indicator
.
(AUTO/LOWER)
(PAUSE)
Advertisement
Table of Contents
