Table of Contents
Advertisement
Using the Caller List
Viewing the Caller List
To check who has called, follow the steps below.
Make sure the handset is in the standby mode.
1
Lift the handset off the base unit
and press
Caller List.
≥The display will show, for example,
the following:
2 new calls
4 3
2
To search from the most recent
call, press
To search from the oldest call,
(‹)
press
≥To scroll between callers,
press (›) or (‹).
3
To exit the list, press
(FUNCTION/EXIT/CH)
≥The handset will return to the
standby mode.
≥Once new calls have been checked, " " will be added.
≥If "No items stored" is displayed in step 1, the Caller List is empty. After
5 seconds, the handset will return to the standby mode.
≥If more than one call is received from the same caller, the date and time of the
most recent call will be recorded. If the same caller calls again, the call entry
with " " will be deleted.
≥In step 1, you can go to the directory list by pressing FWD/EDIT (fl) (p. 36).
24
(›)
(‹)
or
to enter the
1=Directory
(›)
.
.
.
Display
(FUNCTION/EXIT/CH)
(›), (‹)
Advertisement
Table of Contents
