Table of Contents
Advertisement
Perf orm ing Several Com m ands in Sequence
Aut om at ically (M acro Play)
z
In step 6, w hen " * " is displayed in front of the function
The function is pre-programmed.
z
In step 3 and 7, w hen " x" is displayed after the program
number.
The codes have already been programmed.
Note
If you select "IR SET" for a component that already has a learned
button setting, the learned codes for that component are cleared.
Furthermore, if the cleared learned button is used in a Macro Play
setting, the setting for that button will be changed to "NO SET".
St art ing m acro play
1
Press FUNCTION.
The function list appears.
C D
TUNER
PHONO
5.1CH
2
M ove the easy scroll key to select "M ACRO 1" or
"M ACRO 2", then press the key to enter the
selection.
The IR codes appear in the display window as they are
performed.
Notes
• Pressing any of the following buttons during a macro play
operation will cancel the macro play sequence before it is
complete.
– AV ?/1
– ?/1
– SYSTEM STANDBY
– SOUND FIELD
– FUNCTION
– SET UP
• When the Macro Play function does not work properly, set
"WAIT TIME" between each operation.
18
Downloaded from:
https://www.usersmanualguide.com/
Learning t he Com m ands of
your com ponent s
By using the Learning function, it is possible for this
commander to perform learned operations.
Set t ing rem ot e cont rol codes t hat are not
st ored in t he com m ander
When a remote control code is not one of the presets
stored in the commander, it is possible for the commander
to learn the code using the Learning function.
1
Press SET UP and move the easy scroll key to select
"LEARNING", then press the key to enter the
selection.
The function list appears.
<LEARNING>
[VIDEO 1 ]
[VIDEO 2 ]
[VIDEO 3 ]
2
M ove the easy scroll key to select the function you
w ant to use the Learning function, then press the
key to enter the selection.
The button list appears.
Button[VIDEO 2 ]
*POWER
REVERSE
*PLAY
3
M ove the easy scroll key to select the button you
w ant to use for the Learning function, then press
the key to enter the selection.
The learning display appears.
[VIDEO 2 ]
(REVERSE)
LEARNING Start
CLEAR
4
Point the remote code receiver section of the
commander tow ard the receiver/ transmitter on the
remote control to be learned.
About 5 cm ~ 15 cm
5
M ove the easy scroll key to select "Learning Start",
then press the key to enter the selection.
"Learning Now!!" is displayed.
Function
Button
Advertisement
Table of Contents
