Table of Contents
Advertisement
Dow nloading Dat a From t he Receiver
To dow nload CD disc nam es (m em os) and
inf orm at ion on t he presence or absence of a
CD in each slot of a CD changer
1 M ove the easy scroll key to select "CD DISC
NAM E," then press the key to enter the selection.
The SORT menu appears in the display.
<SORT?
NUMBER
ALPHABET
2 M ove the easy scroll key to select "NUM BER" or
"ALPHABET," then press the key to enter the
selection.
The remote starts to download the data.
<LOADING>
[
CANCEL
To cancel t he dow nloading process
Move the easy scroll key to select "EXIT" from the
DOWNLOAD list, then press the key to enter the
selection.
Notes
• If you have changed the discs in the CD changer, be sure to
download the CD disc names (memos) from the receiver or
play the newly inserted disc(s) before you select a disc from the
changer.
• You can download the data only from the Sony CD changer (5,
50, 200, 300, or 400 discs) connected to the receiver using the
CONTROL A1 cable.
• CD DISC NAME is available for up to 400 discs when
COMMAND MODE is set to "CD 1" or "CD 2". When
COMMAND MODE is set to "CD 3", CD DISC NAME is only
available for 1 CD.
20
Downloaded from:
https://www.usersmanualguide.com/
>
]
Not e on dow nloading CD disc nam es
f rom t he CD players
You can download CD disc names (memos) only from
the CONTROL A1/A1 -compatible Sony CD players.
Depending on the CD player setting, it may take
several minutes to download CD disc names
(memos). For faster transmission, make the following
CD player settings.
When an CONTROL A1/A1 -com pat ible Sony
CD player is connect ed t o t he receiver
Check the following:
• The category for the CD function in the IR SET list is set to
"CD1."
• The category for all other functions in the IR SET list is not
set to "CD2."
You can check the current category setting by selecting a
component from the function list (see page 14). Category
indication appears on the second column in the display
window.
When m ult iple CONTROL A1/A1 -com pat ible
Sony CD players are connect ed t o t he receiver
When you use two CD players, set the COMMAND MODE
selector on the back panel of the CD players to "CD1" or
"CD2," respectively, and set the category in the IR SET list to
match the corresponding player's COMMAND MODE
selector position (see page 16). When you use three CD
players, set the COMMAND MODE selector to "CD1,"
"CD2," or "CD3," respectively, and set the category in the IR
SET list to match the corresponding player's COMMAND
MODE selector position.
When setting category for the CD players, do not skip the
number or select the same number to the multiple players.
When an CONTROL A1/A1 -com pat ible Sony
CD player and a non-com pat ible Sony CD
player are connect ed t o t he receiver
Set the COMMAND MODE selector on the back panel of the
CONTROL A1/A1 -compatible CD player to "CD2" and
set the category in the IR SET list for the player to "CD2"
(see page 16).
Set the COMMAND MODE selector on the back panel of the
non-compatible CD player to "CD1" and set the category in
the IR SET list for the player to "CD1" (see page 16).
Before downloading CD disc names (memos) from the
CONTROL A1/A1 -compatible CD player, temporarily
change the category setting of the non-compatible CD player
to some other category ("VideoCD," for example). After
downloading is completed, set the category setting of the
non-compatible CD player to "CD1" again.
When using a non-Sony CD player in
conjunct ion w it h Sony CD players
Program the remote to control the non-Sony CD player (see
page 16).
See the sections above for settings of the Sony CD players.
Advertisement
Table of Contents
