Table of Contents
Advertisement
6
Press the appropriate button on the remote control
to send the remote control code.
Lightly pressing the button once should be sufficient.
In about 3 to 5 seconds, it is displayed whether
learning was successful or not.
When the learning completes successfully, "Learning
OK!", the number of keys, and the capacity used for
learning are displayed.
[VIDEO 2 ]
(PLAY)
Learning OK!
(15/80
When the learning does not complete successfully, the
cause is displayed.
Learning NG!
*(PLAY)
FULL (Keys)
EXIT
* FULL (Keys): shortage of buttons
FULL (memory): shortage of memory
ERROR: other causes
To cancel learning
Move the easy scroll key to select "EXIT" or "CANCEL"
during any step, then press the key to enter the selection.
To erase t he learned code
In step 6 above, Move the easy scroll key to select "CLEAR",
then press the key to enter the selection. The number of
buttons and the capacity used for learning are displayed.
z
The marks that are displayed in front of the button name
indicate the follow ing
x : already learned
*
: pre-programmed
z
In step 3, learned buttons can be selected directly
If you press the button you want to use for the Learned function,
the list will jump to the same button.
z
The Learned function can be applied to the SUB menus
SUB 1 ~ SUB 5 can be learned.
Notes
• You can program up to 80 buttons for the Learned function.
In some cases, you may not be able to program even if you have not
programmed 80 buttons.
• If you select "IR SET" for a component that already has a learned
button setting, the learned codes for that component are cleared.
Furthermore, if the cleared learned button is used in a Macro Play
setting, the setting for that button will be changed to "NO SET".
Using a com m and t hat has been learned
When selecting a learned function, press the button used
to learn that function.
Downloaded from:
https://www.usersmanualguide.com/
20%)
information*
Dow nloading Dat a From
t he Receiver
The remote communicates with the receiver every time a
button is pressed on the remote and displays the current
operation status of the receiver on the display window.
The remote can also download index names of the
program sources, preset stations, CD disc names
(memos)*, and information indicating the presence or
absence of a CD in each slot of a CD changer* from the
receiver.
Appears only when you have selected a Sony CD changer (5, 50, 200,
*
300, or 400 discs) connected to the receiver using the CONTROL A1
cable.
Be sure to turn on the receiver and point the remote
tow ards the receiver w hen performing the follow ing
procedure.
1
Press SET UP .
The set up list appears.
2
M ove the easy scroll key to select "DOWNLOAD,"
then press the key to enter the selection.
The DOWNLOAD list appears.
<DOWNLOAD>
FUNCTION
TUNER INFO
CD DISC NAME
3
To dow nload index nam es
M ove the easy scroll key to select "FUNCTION,"
then press the key to enter the selection.
To dow nload preset st at ions
M ove the easy scroll key to select "TUNER INFO,"
then press the key to enter the selection.
19
Advertisement
Table of Contents
