Advanced Operations; Performing Several Commands In Sequence Automatically (Macro Play) - Sony RM-TP2 Operating Instructions Manual

Advanced Operations

Performing several
commands in sequence
automatically (Macro Play)
The Macro Play function lets you link several
IR codes in sequential order as a single
command. The commander provides 16 macro
lists. You can specify up to 24 IR codes for
each macro list.
Tips
• MACRO 1 has been factory set to turn on Sony AV
components.
• MACRO 16 has been factory set, but you can freely
use the MACRO 16 by programming the commands
you want over the existing program.
• SYSTEM OFF has been factory set to turn off all
Sony AV components. The same program is also
executed when the ?/1/SYSTEM STANDBY
button on the front panel is pressed more than 2
seconds.
Setting the sequence of IR
codes
1
Touch MACRO.
The MACRO screen appears.
2
Turn the jog dial so that the Macro Play
number you want to program
("MACRO3" for example) comes to the
middle box.
3
Touch .
The pull-down menu appears.
4
Touch MACRO SETUP in the pull-down
menu.
The macro step number (BOX) list appears.
5
Touch the macro step number for the
command you want to register ("1" for
example).
The CATEGORY list appears.
6
Select the category ("VCR" for
example).
The MAKER list appears.
continued
GB
23