Table of Contents
Advertisement
Component
Item(s)
MD deck
CONTINUE
SHUFFLE
PROGRAM
REPEAT
DISPLAY
MENU/NO
(EDIT)
YES
REC
DAT deck
REC
REPEAT
CLEAR
Tape deck
A-REC
B-REC
Projector
POWER ON
POWER OFF
INPUT A
INPUT B
INPUT VIDEO
INPUT SELECT
MEMORY
BRIGHT +
BRIGHT –
CONTRAST +
CONTRAST –
ZOOM +
ZOOM –
SHIFT +
SHIFT –
FOCUS +
FOCUS –
Downloaded from:
https://www.usersmanualguide.com/
Function
Selects Continuous Play
Selects Shuffle Play
Selects Program Play
Selects Repeat Play
Changes the information on
the display
Selects editing operation or
cancels editing
Performs editing operation
Pauses for recording
Pauses for recording
Starts Repeat Play
Erases a track in the program
etc.
Makes deck A pause for
recording
Makes deck B pause for
recording
Turn on the projector
Turn off the projector
Switch to the input from
INPUT A jacks
Switch to the input from
INPUT B jacks
Switch to the input from
VIDEO jacks
Switch to the input from
VIDEO IN or S VIDEO IN
jacks
Store the adjusted data in
memory
Adjust the brightness
Adjust the contrast
Adjust the zoom of the
picture
Adjust the lens shift of the
picture
Adjust the focus of the
picture
a) "SIDE A/B" appears for non-Sony LD players.
b) Only with Sony TVs with the picture-in-picture function.
c) Only with Sony TVs that supports the wide-picture mode.
d) Only with the Sony CD changer.
Note
If you have programmed the remote to control non-Sony
components, note the following:
— All the items may not appear when you select a component.
— All the items displayed may not function.
z
To perform title and set up menu operations on the DVD
player
1 Select the DVD player from the function list.
2 Press SUB.
3 Move the easy scroll key to select "TITLE" (for the title menu)
or "SET UP" (for the set up menu), then press the key to enter
the selection.
4 Open up the cover on the remote and move the easy scroll key
to select "DVD" from the CURSOR TYPE list, then press the
key to enter the selection.
5 Use the cursor buttons and the EXECUTE button to perform
menu operations on the DVD player.
To exit the menu operation
1 Close the cover on the remote.
2 Press SUB.
3 Move the easy scroll key to select "TITLE" or "SET UP", then
press the key to enter the selection.
To display the DVD menu, use the MENU button. For details,
see "qk MENU button" on page 7.
z
You can freely assign codes to SUB1 through SUB5
Select when you transmit learned codes. For details, see
"Learning the Commands of your components" on page 18.
11
Advertisement
Table of Contents
