Table of Contents
Advertisement
VC-1
Resolution: Maximum 1 920 x 1 080
Advanced
Frame rate:
Profile
Maximum 24fps (progressive),
30fps (interlace)
Bit rate: Maximum 30Mbps
•
Audio
Codec
Sampling
frequency (kHz)
MP3
8/10.025/12/16/
WMA
22.05/24/32/44.1/
Standard
48
WMA 9
WMA 10 Pro
LPCM
AAC(LC)
HE-AAC
(Ver.1)
Note
●
Maximum size per one file is 2 GB.
●
Some files may not be played back even if their
formats are supported as described here.
●
Files protected by Digital Rights Management (DRM)
cannot be played back.
●
Make sure that both audio codec and video codec
are supported. If the audio codec of motion picture
file is incompatible in format, the pictures may not be
correctly displayed. In addition, files which contain
only audio cannot be played back.
●
Playback is not possible if the maximum bit rate
specified in the codec Profile or Level is exceeded.
Also, depending on the USB memory device,
playback may be impossible even if the bit rate is less
than the indicated maximum bit rate.
●
If the number of pixels of a file exceeds the screen
size, the picture quality will change.
●
Depending on the type of motion picture, the images
may be distorted momentarily during playback.
●
A part of information of still pictures/motion pictures
can be confirmed on the computer accessible to the
target files.
Example of an operation
(Windows)
1. Right-click the file, and then click [Properties].
2. Click the [Details] tab.
(Macintosh)
1. Control-click the file, and then click [Get Info].
2. Click [Details].
98
English
Level: L3 or less supported
Bit rate (kbps)
8 – 320
32 – 384
32 – 384
32 – 384
64 – 1 536
Supported
quantization bit:
8/16/24/32
8 – 1 440
8 – 256
■
Scenario
The play order and time can be specified for a play file.
Save under the name (one-byte alphabetical characters)
"scenario.dat" immediately below root in USB memory.
●
Save files as UTF-8N format.
●
1 to 999 lines can be specified for Scenario.
■
File list
It is a list of play files.
Save under the name (one-byte alphabetical characters)
"filelist.dat" immediately below root in USB memory.
●
Save files as UTF-8N format.
■
LightID definition file
This definition file specifies an individual LightID for the
scenario.
Save under the name (one-byte alphabetical characters)
"lightid.dat" immediately below root in USB memory.
●
The files will be created by "Multi Monitoring & Control
Software". (see page 85)
■
Scenario- / File list-associated terms
File name
It is the name of a play file.
A file name needs to include its extension.
Example:
Introduction.jpg
Contents_Video01.wmv
●
Enter the extension of a file name using one-byte
alphanumeric characters.
File definition
It is a file definition that is shared among scenarios and
files.
PHOTO_xxx:
still image file definition
VIDEO_xxx:
moving image file definition
●
The "xxx" portion can be set from 001 to 999.
●
Enter a file definition using one-byte alphanumeric
characters.
Play time
It is the play time of a file.
Play time can be specified from 3 seconds to 24 hours.
(Unit: second)
Example:
10:
10 seconds
86400: 24 hours
10.5:
10.5 seconds
It can be set down to one-tenth (1/10) of a
second using a decimal point (full stop).
Play time is omissible.
For still images, a file will be played for the period of time
that you selected in [USB media player settings] - [Slide
show duration]. (see page 64)
Advertisement
Table of Contents
