Panasonic SF2H Series Operating Instructions Manual page 72

[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
[Main input]
Displays the (main) input set by switching input.
[Current input]
Displays whether the input currently in use for viewing
is the (main) input set by switching input or the
backup one.
Setting conditions
The following table describes restrictions (available
combinations) on each setting item.
HDMI1
HDMI2
DIGITAL
LINK
Backup
DVI-D
PC
VIDEO
USB
○ : S electable for both Primary and Secondary.
: Selectable for either Primary or Secondary.
× : Not selectable for neither Primary nor Secondary.
Recall display
Pressing <RECALL> displays any of the followings.
● When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI1
Backup mode OK
●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI1
Primary backup input
72
English
Main
HDMI1
HDMI2
PC
DIGITAL
VIDEO
LINK
DVI-D
○ ○
×
○ ○
16:9
16:9
When the conditions for the Backup Input function
are met, the following screen is displayed.
Note
● This menu will be greyed out and cannot be set under
the following condition.
[Input search] is set to the item other than [Off].
•
(see page 69)
When [Setup] - [Image settings] - [No signal image
•
settings] - [Display setting] is set to [On]. (see page
55)
●
When set to the USB input, the unit determines video
signals are interrupted by judging the USB memory is
not connected to the USB terminal.
●
This function may not operate correctly depending on
the image playback device.
Audio input select
Set up the sound when a video input is selected.
USB
1
Select the video input with
Set the audio input with
Audio input select
○ HDMI1
HDMI2
DIGITAL LINK
DVI-D
PC
VIDEO
×
●
The illustration above shows the factory settings.
Video input
HDMI1
HDMI2
DIGITAL LINK
DVI-D / PC /
VIDEO
●
No audio: No audio input (Mute)
When the setting for the audio input has been
changed from the factory settings, the audio input is
displayed as below.
Backup mode OK
HDMI1
HDMI2
DIGITAL LINK
AV IN
AV IN
AV IN
Audio input
HDMI1 / AV IN / No audio
HDMI2 / AV IN / No audio
DIGITAL LINK / AV IN /
No audio
AV IN / No audio
HDMI1
16:9
AV IN
.
.