Panasonic TH-70SF2HU Operating Instructions (Functional Manual)
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Monitor
  5. TH-70SF2HU
  6. Operating instructions (functional manual)

Panasonic TH-70SF2HU Operating Instructions (Functional Manual)

Full hd lcd display
Hide thumbs Also See for TH-70SF2HU:
Table of Contents

Advertisement

Quick Links

Download this manual
This manual is common to all the models regardless of suffixes of the
*
model number.
U : for US, Canada and Mexico
W : for EU, CIS, South East Asia and Middle East Asia
Please read these instructions before operating your set
English
and retain them for future reference.
EU
Operating Instructions
FULL HD LCD Display For business use
Model No.
Functional Manual
TH-80SF2HU
TH-70SF2HU
TH-80SF2HW
TH-70SF2HW
80-inch model
70-inch model
80-inch model
70-inch model
DPQP1204ZA

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TH-70SF2HU

Summary of Contents for Panasonic TH-70SF2HU

  • Page 1 Operating Instructions Functional Manual FULL HD LCD Display For business use TH-80SF2HU 80-inch model Model No. TH-70SF2HU 70-inch model TH-80SF2HW 80-inch model TH-70SF2HW 70-inch model This manual is common to all the models regardless of suffixes of the model number.

  • Page 2: Table Of Contents

    Table of Contents Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Before use Display. ● Illustrations and screens in this Operating Instructions To obtain maximum benefit from your set, please read these...
  • Page 3 Digital ZOOM ........... 35 Using Web Browser Control ......86 Before Using Web Browser Control ····················· 86 On-Screen Menu Displays ......36 Access from Web Browser ································· 87 Adjusting Position .......... 38 Operating with Web Browser ······························ 88 Auto setup ······················································ 38 Using Web Browser Control ·······························...

  • Page 4: Important Safety Instructions

    Important Safety WARNING Instructions WARNING: To reduce the risk of electric shock, do not remove cover or back. 1) Read these instructions. No user-serviceable parts inside. Refer servicing 2) Keep these instructions. to qualified service personnel. 3) Heed all warnings. 4) Follow all instructions.

  • Page 5: Fcc Statement

    Any changes or modifications remain on the screen. However, it will disappear when not expressly approved by Panasonic Corp. of North a general moving picture is displayed for a while. America could void the user’s authority to operate Trademark Credits this device.

  • Page 6: Important Safety Notice

    Important Safety IMPORTANT INFORMATION If a display is not positioned in a sufficiently stable Notice location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Using cabinets or stands recommended by the •...
  • Page 7 If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic dealer. Do not cut off the mains plug. Do not use any other type of mains lead except the one supplied with this display.

  • Page 8: Safety Precautions

    Safety Precautions Caution - For use only with UL Listed Wall Mount Bracket with minimum weight/load 62.0 (135 lbs). When installing the display vertically, be sure that the power indicator comes to the downside. WARNING ■ Setup This LCD Display is for use only with the following optional accessories.
  • Page 9 The unit has deformed or broken parts. • local Panasonic dealer. If you continue to use the unit in this condition, it Do not touch the power supply cord or the plug could result in fire or electric shock.
  • Page 10 Do not burn or breakup batteries. CAUTION Batteries must not be exposed to excessive heat such • Do not place any objects on top of the Display. as sunshine, fire or the like. Ventilation should not be impeded by covering Do not turn the Display upside down.

  • Page 11: Precautions For Use

    Precautions for use Minimum distance: a: 10 cm ”) Cautions when installing 15/16 b: 5 cm Do not set up the Display outdoors. ”) 31/32 The Display is designed for indoor use. • Operation of this unit is guaranteed up to an ambient •...
  • Page 12 Furthermore, do not leave it in contact with a rubber or PVC substance for a long time. Change your password periodically. • Panasonic Corporation or its affiliate companies will • Disposal never ask for your password directly. Do not divulge your password in case you receive such inquiries.

  • Page 13: Feature Of This Unit

    (Approx. 2 m) content associated with the LightID signals, and TH-80SF2HU display it on the screens of such devices. TH-70SF2HU For detail of “LinkRay Service”, see the Panasonic web site (https://panasonic.net/cns/LinkRay/). ● 1JP155AF1U Note ●...

  • Page 14: Remote Control Batteries

    Cautions when Remote Control Batteries moving Open the battery cover. The display has handles for carrying. Hold them when moving. Handle Insert batteries and close the battery cover. (Insert starting from the side.) AAA/R03/LR03 type Note ● Incorrect installation of the batteries can cause battery leakage and corrosion that will damage the remote control.

  • Page 15: Eyebolt 80-Inch Model

    Eyebolt Note 80-inch model ● Installation should be performed by an installation professional. ● Do not suspend using only 1 eyebolt. The display has holes for attaching eyebolts (M10). When installing, use them to suspend the display. ● Use commercially sold M10 eyebolts with a shank length of 12 mm to 25 mm that satisfies the load Use the eyebolt only for temporary suspension or condition of product quality.

  • Page 16: Connections

    Connections Cable fixing Note ● 3 clampers are supplied with this unit. Fix the cables at 3 locations using the holes for clampers as shown AC cord connection and fixing / below. Cable fixing If you need more clampers, purchase them from your dealer.

  • Page 17: Video Equipment Connection

    Video equipment connection DIGITAL LINK IR IN, IR OUT: Infrared Signal Input / Output DVI-D IN, DVI-D Input / Output Terminal Terminal DVI-D OUT: Connect to video equipment Use this when operating more with DVI-D output. Also, when than one display with one remote displaying the picture by daisy control.

  • Page 18: Before Connecting

    HDMI 1 and HDMI 2 terminals Before connecting connection ● Before connecting cables, carefully read the operating instructions for the external device to be connected. Note ● Turn off the power of all devices before connecting ● Video equipment and HDMI cable shown are not cables.

  • Page 19: Dvi-D In / Dvi-D Out Terminal Connection

    Pin assignments and signal names for HDMI DVI-D IN / DVI-D OUT terminal Terminal connection Note ● Video equipment and cables shown are not supplied with this unit. ● DVI-D IN terminal is for Single Link only. ● Audio input is shared with AV IN terminal. Pin No.
  • Page 20 Daisy chain connection Pin assignments and signal names for DVI-D Input/ Output It is possible to daisy chain multiple displays when displaying the picture on multi screen, etc. Pin No. Signal Name T.M.D.S. data 2 - T.M.D.S. data 2 + T.M.D.S.

  • Page 21: Pc In Terminal Connection

    PC IN terminal connection Note ● Component video signal is supported with this terminal (Mini D-sub 15P). Change the [Component/ RGB-in select] setting in the [Signal] menu to (Female) DIGITAL LINK [Component] (when Component signal connection) or [RGB] (when RGB signal connection). (see page 48) ●...

  • Page 22: Av In Terminal Connection

    AV IN terminal connection DIGITAL LINK terminal connection Note Twisted pair cable transmitters such as the Panasonic Digital Interface Box (ET-YFB100G) or the DIGITAL ● Video equipment and connection cables are not LINK Switcher (ET-YFB200G) use twisted pair cables supplied with this unit.

  • Page 23: Serial In / Serial Out Terminal Connection

    ● Corresponding signal for DIGITAL LINK input is the SERIAL IN / SERIAL OUT terminal same as that of HDMI input. (see page 122) connection ● For audio, it is also possible to use AV IN terminal input. (For [Audio input select] function, see page 72.) The SERIAL terminal conforms to the RS-232C interface specification, so that the Display can be controlled by a computer which is connected to this terminal.
  • Page 24 When sending a command which does not require Start Colon parameter, a colon (:) is not needed. ● Consult your local Panasonic dealer for detail 3-character command Parameter(s) instructions on command usage. (3 bytes) For more details, visit the following web site.

  • Page 25: Ir In / Ir Out Terminal Connection

    It is possible to daisy chain multiple displays, and then IR IN / IR OUT terminal connection control the specific display with PC. Connect the mini plug (M3) cable from the IR OUT terminal of the first display to the IR IN terminal of the second display.

  • Page 26: Audio Out Terminal Connection

    AUDIO OUT terminal connection USB terminal connection Connect the USB memory (commercially available) to Note use “USB media player” or “Memory viewer”. (see page ● Audio equipment and the cable shown are not 95, 107) supplied with this set. Also, power is supplied when a separately sold stick PC, etc.
  • Page 27 Pin assignments and signal names for USB Terminal Do not frequently repeat connecting/disconnecting • the USB memory device. Wait at least 5 seconds after connection, and then remove the USB memory device. Before reconnection, wait at least 5 seconds. A certain length of time is required so that the display can recognise that the USB memory device is switched for connection or disconnection.

  • Page 28: Identifying Controls

    Identifying Controls Display INPUT MENU ENTER 80-inch model ● Slide the lever on the rear panel to eject the power indicator and remote control sensor. 70-inch model To store them, slide the same lever, or directly push in the bottom surface of the remote control sensor. Note ●...

  • Page 29: Remote Control Transmitter

    14 RECALL Remote Control Transmitter ● Displays the current setting status of Input mode, Aspect mode, etc. (see page 32) 15 RETURN ● Used to return to the previous menu. (see page 36) 16 FUNCTION ● Displays [Function button guide]. (see page 66) 17 OFF TIMER ●...

  • Page 30: Basic Controls

    Basic Controls Connect the AC cord plug to the Display. (see page 16) Connect the plug to the socket outlet. AC socket outlet AC cord (supplied) Note ● Main plug types vary between countries. The power plug shown at left may, therefore, not be the type fitted to your set.

  • Page 31: Selecting The Input Signal

    ■ When the Unit is turned on for the first time Selecting the input signal Following screen will be displayed. Select the signals input to the unit. Select the language with Press <INPUT> or <INPUT (Unit)>. press <ENTER>. OSD language English (UK) Deutsch Français...

  • Page 32: Recall

    RECALL Volume Adjustment It is possible to check the setting status of input label, Press <VOL +> <VOL -> or <+ (Unit)> <- (Unit)> to picture mode, etc. adjust volume. Press <RECALL>. Unit Current setting status will be displayed. INPUT MENU ENTER HDMI1...

  • Page 33: Off Timer

    OFF TIMER The Display can be preset to switch to stand-by after a fixed period. (30 min, 60 min, 90 min) The setting switches each time <OFF TIMER> is pressed. ● [0 min] → [30 min] → [60 min] → [90 min] → [0 min] (Cancel) ● When three minutes remain, the remaining time will flash (Red).

  • Page 34: Aspect Controls

    ASPECT Controls Aspect mode Description Press <ASPECT> or <ENTER (Unit)> repeatedly to move through the aspect options: Pictures are displayed in the 4:3 area. Pictures with a 4:3 aspect ratio are displayed as is. PC signals are enlarged or reduced to be displayed in the 4:3 area.

  • Page 35: Digital Zoom

    Digital ZOOM Switch the zoom ratio for the screen areas. Switches every time <ENTER> is pressed. Select the screen areas (25 areas) to zoom in, and zoom in the selected image areas ×2, ×3 or ×4. (Operate using the remote control. The buttons on the unit cannot be used for some operations.) Exit Exit...

  • Page 36: On-Screen Menu Displays

    On-Screen Menu Set. Press to set. Displays Display the menu screen. Remote Control Press to set. INPUT MENU ENTER Exit from the menu. Press to select. Unit Press for several INPUT MENU ENTER times. Press. Each time the button is pressed, the menu screen Press <RETURN>...
  • Page 37 Menu display list [Setup] menu ● Menu that cannot be adjusted is greyed out. (see page 47 ‒ 67) Adjustable menu changes depending on signal, input and menu setting. Setup Signal [Position] menu Screensaver (see page 38 ‒ 39) Input label Power management settings Position HDMI-CEC settings Default...

  • Page 38: Adjusting Position

    Adjusting Position Auto setup When inputting a PC signal, [H-position] / [V-position], [H-size] / [V-size], [Clock phase] and [Dot clock] are Press <POSITION> to display the automatically corrected. [Position] menu. This setting is enabled under the following condition: Position ● When inputting an analogue signal (PC).
  • Page 39 Note [H-position] Adjust the horizontal position with ● In some cases, noise appears outside the area picture is displayed, but it is not a malfunction. [H-size] Adjust the horizontal size with [V-position] Adjust the vertical position with [V-size] Adjust the vertical size with [Clock (For PC IN input) phase]...

  • Page 40: Sound Adjustment

    Sound Adjustment [Bass] Adjusts low pitch sounds. [Treble] Adjusts high pitch sounds. [Off]: [Surround] Press <SOUND> to display the Normal sound [Sound] menu. [On]: Surround sound Sound Default Default Note Output select SPEAKERS ● [Bass], [Treble] and [Surround] settings are Balance memorised separately for [Normal], [Dynamic] and Sound mode...

  • Page 41: Picture Adjustments

    Picture Adjustments [Picture mode] This menu switches to easy-to- see pictures suitable to the picture source or environment where this Press <PICTURE> to display the unit is used. [Picture] menu. [Vivid signage]: Suitable for signage applications Picture featuring more vivid and sharper Default Default images in bright environments such...
  • Page 42 [Brightness] Adjusts for easier viewing of dark 2 Select the user to memorise pictures. settings with and press Darker ↔ Brighter <ENTER>. [Colour] Adjusts colour saturation. Adjust colour temperature Less ↔ More Change to 6500K [Hue] Adjusts hue of skin colour. USER1 USER2 Reddish ↔...
  • Page 43 The settings are saved for the user. [Refine Enhances the sense of resolution by enhancer] correcting fuzzy outlines of pictures When you return to [Picture] menu, resulted from resizing, etc. the user you have set is selected for [Off], [Low], [Mid], [High] [Colour temperature].

  • Page 44: Picture Profiles

    Picture Profiles Overview of Picture Profiles Original picture Adjust picture. Up to 6 combinations of picture adjustment values (in (see page 41 ‒ 43) the [Picture] menu) can be stored in the display memory as profiles and applied as needed, for a convenient way to enjoy your preferred picture settings.

  • Page 45: Saving Profiles

    When you finished entering the profile Saving profiles name, select [Ok] with Follow these steps to save picture adjustment values as press <ENTER>. profiles. Specify the picture quality in the MY MEMORY1 █ [Picture] menu. (see page 41 ‒ 43) In the [Picture] menu, select [Memory save] with and press <ENTER>.

  • Page 46: Editing Profiles

    ■ Renaming profiles When profile is being loaded, profile name is In the [Picture] menu, select [Memory displayed. edit] with and press <ENTER>. Memory save 16:9 Memory load Memory name: MEMORY2 Memory edit Select [Memory name change] with and press <ENTER>. Note Memory edit ●...

  • Page 47: Setup Menu

    Setup menu Signal Examples of [Signal] submenu screen When HDMI / DVI / DIGITAL LINK is selected Press <SETUP> to display the [Setup] menu. Signal YUV/RGB-in select Setup Cinema reality Signal Noise reduction Auto Screensaver MPEG noise reduction Input label Signal range Full(0-255) Power management settings...
  • Page 48 ■ ■ [Component/RGB-in select] [Cinema reality] This menu is displayed at PC signal input. Faithfully reproduces videos shot with cinema films. Set this to [Off] normally. Select to match the signals from the source connected to PC IN terminal. Note [Component] YP signals ●...
  • Page 49 ■ ■ [Signal range] [Dynamic backlight control] This menu is displayed at HDMI1, HDMI2, DIGITAL Improves picture contrast and alleviates whiteness LINK and DVI-D IN inputs. Switches the dynamic by controlling the back light when signals with the low range to match the signals from the source connected average brightness level (APL) are input.

  • Page 50: Screensaver (For Preventing Image Retention)

    Screensaver Screensaver (For preventing image retention) 2017/01/01 SUNDAY 10:00 Start Do not display a still picture, especially in 4:3 mode, for Mode Interval any length of time. Periodic time 0:00 Operating time 0:00 If the display must remain on, a Screensaver should be used.

  • Page 51: Input Label

    Input label Power management settings This function can change the label of the Input signal to Set each item to reduce power consumption. be displayed. This function works only for the input terminal that is [Input label] - submenu screen currently selected.
  • Page 52 [HDMI1 power management] [DVI-D power management] When this function is set to [On], it operates under When this function is set to [On], it operates under the following conditions to turn the power on or off the following conditions to turn the power on or off automatically.

  • Page 53: Hdmi-Cec Settings

    [Extended standby mode] HDMI-CEC settings Sets the operation in standby mode by the “Power Set for HDMI-CEC function. management” function for the input terminal for which the “Power management” function is set to [On]. For details of HDMI-CEC function, refer to “Using HDMI- CEC function”.

  • Page 54: Image Settings

    ■ [Display → Device] Image settings Enables/Disables this unit to perform interlocking Sets the image displayed on the screen when the power control of the HDMI-CEC compatible device. is turned on or no signal is input. [Disable]: [Image settings] - submenu screen Disables this unit to perform interlocking control of the HDMI-CEC compatible device.
  • Page 55 [Image select] [Clear user image] Select the image to display. Clears the image read in [Read user image]. [Default image]: Panasonic logo (blue background) [Startup image settings] - submenu screen [User image]: Image registered by the user Startup image settings...

  • Page 56: Lightid

    OSD language https://panasonic.net/cns/LinkRay/ ● If [LightID] is set to [Internal ID] at the time of Select your preferred language. purchase, an ID to guide you to the Panasonic Selectable languages homepage is sent. English(UK) ● In the following cases, the reception performance of...

  • Page 57: Multi Display Settings

    ■ [Bezel H adjustment] / [Bezel V adjustment] Multi display settings Adjust the area of image hidden in the joint 1 to 10 displays can be aligned in horizontal direction horizontally and vertically respectively. and vertical direction respectively, and those displays 0 to 100 are regarded as one group.

  • Page 58: Set Up Timer

    Set up timer Date and time Sets the program to turn the power on with the specified Set date and time. ([- -] shows no programme is set.) time and video input, or to turn the power off at the [Date and time] - submenu screen specified time.
  • Page 59 ■ ■ [Synchronize display setting] [NTP status] Synchronizes the time of all the displays connected on Displays the current [NTP synchronization] and [Time the network. zone] (see page 91) settings. Note Note ● ● This function does not operate if the displays to When [NTP synchronization] is set to [On], and if synchronize the time are not connected via a LAN.

  • Page 60: Network Settings

    ■ [Display name] Network settings The name of the Display that is shown on the network Set when networking with a computer. can be changed. [Network settings] submenu will be displayed. Note Network settings ● The name can be changed only when [Auto display name] is set to [Off].
  • Page 61 ■ [DIGITAL LINK mode] Entering numbers Switches communication method of DIGITAL LINK IP address terminal. 192.168.000.008 [Auto]: Communication method is selected automatically. 1. Select the address and press <ENTER>. HDMI, LAN, serial communication are possible. 2. Select digits with Ethernet connection is possible. 3.
  • Page 62 DIGITAL LINK status ● This function can only be selected when the LINK status No link Panasonic device that supports DIGITAL LINK output HDMI status No HDMI (ET-YFB100G, ET-YFB200G) is connected to a Signal quality DIGITAL LINK / LAN terminal and its power is on.

  • Page 63: Usb Media Player Settings

    ■ [USB memory network settings] USB media player settings Sets whether to permit the network setting using the Set for “USB media player”. USB memory device. (see page 117) For details of the function, refer to “USB media player” [Permit]: (see page 95).

  • Page 64: Memory Viewer Settings

    ■ [Playlist edit] Memory viewer settings Creates / Edits the scenario file (scenario.dat). Set for “Memory viewer”. For details of [Playlist edit], refer to “Playlist edit For details of the function, refer to “Memory viewer” (see function” (see page 102). page 107).

  • Page 65: Function Button Settings

    ■ [Play method] Function button settings Sets the playback method of content. Assigns specific functions to the numeric buttons (<1> [None]: to <6>). The buttons can be used as shortcut keys by Automatically returns to the content display screen assigning frequently used operations. when the playback of the selected file has finished.

  • Page 66: Display Orientation

    Press <1> ‒ <6>. [Playlist edit] ● Pressing the numeric button displays [Playlist The function for the pressed button starts to operate. edit] screen. (see page 102) Example: When <2> is pressed. Shipping condition Memory load The following functions are assigned to the numeric buttons as factory default.

  • Page 67: Osd Position

    OSD position Sets the display position of the on-screen menu. Each time is pressed, the display position of the on-screen menu changes. Display example: 18:00 Left 18:00 Centre Menu display duration Sets the display duration time for the on-screen menu. [5 sec] to [180 sec] Menu transparency Sets the transparency rate of the on-screen display...

  • Page 68: About Options Menu

    LAN control protocol Protocol 2 Information timing Options Power on screen delay Clock display Power on message(No activity power off) Power on message(Power management) POWER button lock Note ● [POWER button lock] function is only for TH-80SF2HU and TH-70SF2HU. English...
  • Page 69 [Changing delay] Input search Sets the delay time until the input is switched during When a signal is not detected, another input with a [Input detection]. signal is automatically selected. [Off]: Note Switches the input if a signal is interrupted even for ●...
  • Page 70 ■ [Input change mode]: [Quick] ● [Changing delay] is the function to prevent the accidental input switch during a short period, such as Promptly switches to the backup input if an when the signal is interrupted due to the frequency interruption of video occurs, and enables switching change for the input signal while [Input detection] is between digital (HDMI1 / HDMI2 / DIGITAL LINK /...
  • Page 71 [Backup input change] When the conditions for the Backup Input function are met, the following screen is displayed. Displays whether or not operating conditions for the Backup Input function are met. [Inactive]: Main input Indicates that the conditions are not met, and Backup OK inactivates the Backup Input function.
  • Page 72 [Backup input change] When the conditions for the Backup Input function are met, the following screen is displayed. Displays whether or not operating conditions for the Backup Input function are met. [Inactive]: Backup mode OK Indicates that the conditions are not met, and inactivates the Backup Input function.
  • Page 73 Onscreen display Maximum VOL function Set to display / hide the following Onscreen display. Enables/Disables [Maximum VOL function]. ● Power on display [Off]: ● Input signal switch display The sound volume level can be set up to 100 ● No signal display (maximum).
  • Page 74 Button lock PC auto setting Limits operation of the buttons on the unit. Sets the operational mode of the automatic position adjustment in the [Position] menu. [Off]: [Off]: All the buttons on main unit can be used. Automatic position adjustment starts when <AUTO [On]: SETUP>...
  • Page 75 About how to reset the settings to defaults, refer to Select the LAN control protocol. “Initialization” (see page 77) [Protocol 1]: Control with the Panasonic Display sequence. Serial ID function [Protocol 2]: Set to control external control with the PC connected to Control with the sequence that is compatible with SERIAL terminal according to the Display’s ID number...
  • Page 76 Information timing Power on screen delay Set up the informing manner for no signal or You can set the power-on delay time of the displays to temperature rising. reduce the power load, when you press <Main Power On / Off button> to turn on the multiple displays that are During RS-232C controls: set together.
  • Page 77 <Main Power On / Off button> operation is enabled. Note ● This function is only for TH-80SF2HU and TH-70SF2HU. Initialization When both main unit buttons and remote control buttons are disabled due to the [Button lock], [Controller user level] and [Controller ID function] settings, set all the values [Off] so that all the buttons are enabled again.

  • Page 78: Using Network Function

    Using Network Example of network connection Function Note ● To use the network function, set each item in [Network settings] and make sure to set [Network control] to [On]. This unit has a network function and you can control the (see page 60) Display connected to the network using your computer.
  • Page 79 The transmission distance between the twisted pair cable transmitter and the device is normally up to 100 A twisted pair cable transmitter, such as the Panasonic meters. When the transmitter supports [Long reach] device that supports DIGITAL LINK output (ET-...

  • Page 80: Command Control

    Default user name and password are as follows: User name: dispadmin The communication differs whether [Options] - [LAN control protocol] is set to [Protocol 1] or [Protocol 2]. Password: @Panasonic 1. When [LAN control protocol] is set Command transmission method to [Protocol 1].
  • Page 81 Error response Command transmission method Transmit in the following command format Last Transmitted data Error message terminal symbol Last Control Control “ERR1” : Undefined control Data part terminal symbol symbol command symbol “ERR2” : Out of parameter range Control command “ERR3”...
  • Page 82 2. When [LAN control protocol] is set Transmit in the following command format to [Protocol 2]. Transmitted data Communicates with the same protocol as that of a Last Panasonic projector Header Data part terminal ■ When the WEB control administrator...
  • Page 83 Data part Space Mode terminal the received data. symbol ● Consult your local Panasonic dealer for detail [NTCONTROL] instructions on command usage. (CR) (ASCII For more details, visit the following web site. character 0x20...

  • Page 84: Pjlink Protocol

    The name selected in [Display name] 33: DIGITAL LINK input is returned. (DIGITAL LINK) INF1? Manufacturer name query 34: DVI-D IN input (DVI-D) Returns “Panasonic”. 41: USB input (USB) 42: MEMORY VIEWER input INF2? Model name query (MEMORY VIEWER) Returns “70SF2HU” / “70SF2HW”.

  • Page 85: Multi Monitoring & Control Software

    Up to 2 048 devices can be registered for free for http://pjlink.jbmia.or.jp/english/index.html a maximum of 90 days after the installation to the computer has completed. ● For more details, visit the following web site. (https://panasonic.net/cns/prodisplays/download/ software/index.html) ● About early warning function, visit the following web site. (https://panasonic.net/cns/prodisplays/products/et- swa100/index.html)

  • Page 86: Connecting With Lan

    Connecting with Using Web Browser Control You can use a Web browser to control the unit and set Note up a network and password. ● To use the network function, set each item in [Network settings] and be sure to set [Network Before Using Web Browser Control control] to [On].

  • Page 87: Access From Web Browser

    Click [Proxies] and set up a proxy server. log in with the administrator rights. 3 Deselect the [Web Proxy] and [Automatic Proxy ● Under no circumstances, Panasonic Corporation or Configuration] boxes. its associated companies will ask customers their password directly.

  • Page 88: Operating With Web Browser

    Display status page Operating with Web Browser Click [Status] → [Display status]. ■ WARNING display page This page displays the Display statuses established for the items shown below. The following warning page is displayed when you log in with the factory default user name and password. Click the [Continue] button to display the [Display Control Window] page.
  • Page 89 ■ About [Administrator] Detail control page Click [Display control] → [Advanced control]. Enter a command. Use the same command used for the serial control. Response from the unit is displayed. Command is sent and run. Note ● After the settings are changed, it may take a while till the display status is displayed.
  • Page 90 ■ About [User] ● See below when you log in with administrator privileges and change the account. It is recommended not to use the current user • name/password or default values for a new user name/password. ● See below when you log in with user privileges and change the password.
  • Page 91 Complete the detailed settings and Adjust clock page click [Next]. Click [Detailed set up] → [Adjust clock]. In this window, DNS server settings can be made as well as address information set on the [LAN setup] menu of the display. After all required items have been entered, click [Next].
  • Page 92 Ping test page [Browser Remote Control] This page makes it possible to check whether the It is possible to operate the display with the operation network is connected to the DNS server, etc. buttons displayed on the WEB browser. Click [Detailed set up] → [Ping test]. Click [Browser Remote Control].

  • Page 93: Using Web Browser Control

    ● Avoid operating the multiple Browser Remote Control Using Web Browser Control simultaneously. Crestron Connected™ ● The same operations are applicable to both (Crestron Connected™ operation screen) administrator privileges and user privileges. You can monitor or control the Display using “Crestron ●...
  • Page 94 ● [Tools] page ● [Info] page Click [Tools] on the operation page. Click [Info] on the operation page. [Control System] [Display Name] Sets the information required for the communication Displays the name of the Display. with the controller that is connected to the Display. [Mac Address] [User Password] Displays the MAC address.

  • Page 95: Using "Usb Media Player

    Using “USB media Parent Child player” USB memory USB memory Function description The USB media player displays still pictures and motion pictures saved in a USB memory by inserting the USB Hub or broadband router memory device into the display. Note ●...

  • Page 96: Preparation

    Motion pictures Preparation Extension Codec ■ Video Audio Supported device MPEG4 AVC/ MPEG-1/2 Audio Layer-3 ● Commercially available USB memory devices are (MP3) H.264 supported. (Those with security functions are not Linear PCM supported. Operation is not guaranteed.) MPEG-4 Visual MPEG4 AVC/ MPEG-1/2 Audio Layer-3 ●...
  • Page 97 ■ Scenario VC-1 Resolution: Maximum 1 920 x 1 080 Advanced Frame rate: The play order and time can be specified for a play file. Profile Maximum 24fps (progressive), Save under the name (one-byte alphabetical characters) 30fps (interlace) “scenario.dat” immediately below root in USB memory. Bit rate: Maximum 30Mbps ●...

  • Page 98: Playing Back The Files

    For moving images: a file will be played for the duration Single Media Player (Type 2) of the play time of the file. Files will be played in the order they were listed in a ● Enter play time using one-byte numeric characters. scenario.
  • Page 99 Setting example Setting example USB memory contents Parent side USB memory contents filelist.dat scenario.dat filelist.dat scenario.dat Introduction.jpg L_Introduction.jpg Contents_Video1.wmv L_Contents_Video1.wmv Contents_Video2.wmv L_Contents_Video2.wmv Contents_Video3.wmv L_Contents_Video3.wmv scenario.dat (scenario) scenario.dat (scenario) PHOTO_001:10 VIDEO_001:10 PHOTO_001:10 VIDEO_002:20 VIDEO_001:10 VIDEO_003: VIDEO_002:20 VIDEO_003: filelist.dat (file list) filelist.dat (file list) PHOTO_001:Introduction.jpg VIDEO_001:Contents_Video1.wmv GroupID:G01...
  • Page 100 Note For error code 1, 11 and 13, only the error code • and the detail of the error are displayed as shown ● While the menu screen is not displayed, you can below. skip to the next playback file with , to the previous playback file with , or play back again from the...

  • Page 101: Network Environment (Multi Media Player Only)

    Network environment (Multi Media Starting / ending Media Player Player only) ■ For Single Media Player ■ Example of setting up LAN connection and Start IP address / Subnet mask 1. Insert the USB memory device for Media Player to the USB terminal on the side of the display. As mentioned below, connect several units together with LAN cables and set up IP addresses / Subnet masks so Note...

  • Page 102: Resume Play Function

    ● Use the remote control for the playlist editing function Resume Play function operation. After Media Player ends, the file to be played back next time varies depending on the setting of [USB media 1. File selection screen player settings] - [Resume play]. Select content files to play.
  • Page 103 2. Play order / Play time setting screen ● For content files whose playback time is set, “: playback time (sec.)” is displayed on the right side Arrange the selected content files in playback order, of the file name. and set the playback time. For content files whose playback time is not set, “:(number)”...

  • Page 104: Schedule Playback Function Using "Content

    ● If the input is switched during schedule play mode, Schedule playback function using the schedule playback is suspended. “Content Management Software” To resume the schedule playback This unit supports “Content Management Software” to Switching the input to [USB] will resume playback •...
  • Page 105 ■ Power control ● If the contents of setting files (under [PRIVATE] folder) created and delivered using “Content The power is turned on/off at the time set with the Management Software” are changed, operations are schedule data. not guaranteed. Note ●...
  • Page 106 ■ Disabled functions ● If [Multi display settings] is specified in the schedule data of “Content Management Software”, the setting The following main unit’s functions are set to [Disable is switched to the specified multi screen. [Multi display (Off)] during schedule play mode. settings] cannot be changed during the specified ●...

  • Page 107: Using "Memory Viewer

    Using “Memory ts/mts/ MPEG4 AVC/ MPEG-1/2 Audio Layer-3 m2ts H.264 HE-AAC(Ver.1) viewer” MPEG-4 Visual MPEG4 AVC/ MPEG-1/2 Audio Layer-3 H.264 AAC(LC) MPEG-4 Visual HE-AAC(Ver.1) The “Memory viewer” selects still pictures and motion MPEG4 AVC/ AAC(LC) pictures stored in a USB memory device, and show H.264 HE-AAC(Ver.1) them on the display.

  • Page 108: Displaying The "Memory Viewer" Screen

    Music Displaying the “Memory viewer” Extension Codec screen MPEG-1/2 Sample rate: Press <INPUT> to switch the input to [MEMORY Audio Layer-3 Maximum 48 kHz VIEWER]. AAC(LC) Channel: Assigning [Input] function to the numeric buttons (<1> Maximum 2 ch HE-AAC to <6>) can switch to [MEMORY VIEWER] with a single (Ver.1) Bit rate: touch of a button.

  • Page 109: Playing The Pictures

    4. Status indicator icon Playing the pictures Displays the type of content, display order and playback method with icons. Type of content [Picture] [Picture / Video] [Video] [Video / Music] [Music] [Picture / Music] [All] Select a file in the same manner in the file list view. In the thumbnail view / the file list Display order view, press...

  • Page 110: Playing The Video / Music

    <3> : Not used 2. Time bar <4> : Not used 3. Remote control operation guide <5> : Display / Hide the remote control operation Press the remote control buttons to perform the guide. following operations. <6> : Not used Pressing <4>...

  • Page 111: Using Hdmi-Cec Function

    Using HDMI-CEC Interlocking devices function Performs the following interlocking operations by setting each item of [Link function] for [HDMI-CEC settings]. ■ [Display → Device] interlocking The HDMI-CEC function enables the remote control Turning this unit off turns off all the connected •...

  • Page 112: Operating A Device (Using The Remote Control Of This Unit)

    ■ Menu operation of HDMI-CEC compatible Operating a device (using the remote devices control of this unit) When the setting menu of the HDMI-CEC compatible device is displayed, it is possible to operate the menu Display the operation screen in [Setup] - [HDMI-CEC with the remote control of this unit (<ENTER>, settings] - [HDMI-CEC operation].

  • Page 113: Using Data Cloning

    Using data cloning Copying data to other display via Display [Setup] menu pressing Menu settings and adjusted values of a single display <SETUP>. can be copied to multiple displays via LAN or using a USB memory. Select [OSD language] with ■...
  • Page 114 In this case, remove the power plug, wait sufficient time, and then connect the power plug again to turn the power on. ● [POWER button lock] function is only for TH-80SF2HU and TH-70SF2HU. English...

  • Page 115: Copying The Display Data To The Usb Memory

    Select [YES] with and press Copying the display data to the USB <ENTER>. memory Data copy to the USB memory starts. Insert the USB memory device to the USB terminal at the side of the Data to USB Memory display. The data will be overwritten when any data exists originally.

  • Page 116: Copying The Usb Memory Data To The Display

    <SETUP>. ● [POWER button lock] function is only for Select [OSD language] with TH-80SF2HU and TH-70SF2HU. press <ENTER> for over 3 seconds. The following display appears. Options Display software information Software licenses...

  • Page 117: Usb Memory Network Settings

    USB memory Saving the LAN setting file to the USB memory device network settings Create the following files, and save them to the USB memory device. File name: th-70sf2h_network.sh Using a USB memory device, the network setting can be Setting Example made for multiple displays.

  • Page 118: Copying The Usb Memory Data To The Display

    Rewriting the Copying the USB memory data to the display Internal LightID Insert the USB memory device to the USB terminal at the side of the display. Using the USB memory device, the LightID written in the LightID-distribution file can be updated as the Internal USB terminal LightID of the display.
  • Page 119 Copy the LightID distribution file to When the write of the Internal LightID the USB memory device. is complete, remove the USB memory device from the USB terminal. Internal LightID upgrades successful! Please remove the USB device. Note ● The password is only compatible with the HEX notation.

  • Page 120: Id Remote Control Function

    ID Remote Control Press one of <0> ‒ <9>. Sets the units digit. Function ● The steps from 3 to 5 need to be done within 5 seconds. ● Adjustable ID number range is 0 ‒ 100. Example: You can set the remote control ID when you want to use To set the ID to “1”: After step 3, press <0>...

  • Page 121: Entering Characters

    Entering characters Select Space key with , and press <ENTER>. MY █ Some settings require to enter characters. To enter text, select characters in the on-screen keyboard. Example: Entering profile names ([Memory save]) MEMORY1 █ – Delete All delete Cancel a/A/@ Space key As shown in step 3, select the characters to enter...

  • Page 122: Preset Signals

    Preset Signals This unit can display the video signals shown in the table below. Scanning frequency Dot clock Corresponding signal Resolution (Dot) Format* Horizontal frequency (MHz) Vertical (Hz) (kHz) NTSC/NTSC4.43/ 720 x 480i 15.73 59.94 PAL-M/PAL60 PAL/PAL-N/SECAM 720 x 576i 15.63 50.00 480/60i...
  • Page 123 Scanning frequency Dot clock Corresponding signal Resolution (Dot) Format* Horizontal frequency (MHz) Vertical (Hz) (kHz) 1366 x 768/50 1 366 x 768 39.55 50.00 69.92 D/H/DL 1366 x 768/60 1 366 x 768 48.39 60.03 86.71 R/Y/D/H/DL 1366 x 768/60 1 366 x 768 48.00 60.00...

  • Page 124: Shipping Condition

    ■ Shipping condition Unit Press <MENU (Unit)> for several times and display the [Setup] menu. It is possible to reset the following data to the factory Select [Menu display duration] with settings. , and then press and hold <ENTER Settings and set values of [Picture], [Sound], [Setup], (Unit)>...

  • Page 125: Troubleshooting

    Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Check Picture Sound Electrical Appliances Cars / Motorcycles Fluorescent light Interference Noisy Sound Volume (Check whether the mute function has been activated on the remote control.) Normal Picture No Sound...
  • Page 126 Symptoms Check Check whether [Controller ID function] is set to [On], or <ID MODE> switch [Controller ID function] function cannot is set to <ON>. (see page 75) be used. (When [Controller ID function] is set to [On], you need to set <ID MODE> (When using ID remote controller) switch to <ON>...
  • Page 127 Symptoms Check Check that [LightID] is not set to [Off]. (see page 56) When [LightID] is not set to [External control]: Check that the LightID transmission is specified by “Multi Monitoring & Control Software”, “Content Management Software” or the function of the USB media player. (see page The LightID cannot be received.

  • Page 128: Specifications

    Specifications Power source TH-80SF2HU, TH-70SF2HU: 110 ‒ 127 V ~ (110 ‒ 127 V alternating current), 50/60 Hz Model No. TH-80SF2HW, TH-70SF2HW: : TH-80SF2HU 80-inch model 220 ‒ 240 V ~ (220 ‒ 240 V alternating current), : TH-70SF2HU 50/60 Hz 70-inch model : TH-80SF2HW 80-inch model Operating condition : TH-70SF2HW 70-inch model Temperature Power Consumption 0 °C ‒ 40 °C (32 °F ‒ 104 °F)* Humidity 80-inch model 380 W 20 % ‒ 80 % (no condensation)
  • Page 129 PC IN Sound Mini D-sub 15 Pin (Compatible with DDC2B) × 1 Speakers Y/G: 80-inch model 1.0 Vp-p (75 Ω) (with sync signal) 1.5 cm × 2.5 cm × 1 / φ7 cm × 1 0.7 Vp-p (75 Ω) (without sync signal) ×...

  • Page 130: Software License

    [Settings] menu of this product. At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL...
  • Page 131 5770 Ambler Drive Mississauga, Ontario L4W 2T3 For TH-80SF2HW and TH-70SF2HW Panasonic Testing Centre Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, F.R. Germany English Web Site: https://panasonic.net/cns/prodisplays/ TP1117TS0 -PB © Panasonic Corporation 2017...

This manual is also suitable for:

Th-80sf2huTh-80sf2hwTh-70sf2hw

Table of Contents