Panasonic SF2H Series Operating Instructions Manual page 55

■
[Startup image settings] /
[No signal image settings]
Operate [No signal image settings] in the same way
as [Startup image settings].
[Startup image settings] - submenu screen
Startup image settings
Display setting
Image select
Read user image
Clear user image
[Display setting]
Sets the image display when the power is turned on.
[Off]: Disables each image setting function.
[On]: Enables each image setting function.
Note
●
When no-signal image is displayed, the screen
position moves at certain intervals and images are
displayed to alleviate burn-in on the LCD panel.
●
Shifts the display position regardless of the setting
of [Wobbling] (see page 56).
●
When this function is operating, part of the screen
may appear to be missing.
[Image select]
Select the image to display.
[Default image]: Panasonic logo (blue background)
[User image]: Image registered by the user
Note
●
Only when [Default image] is displayed, the logo
automatically rotates when displayed, according
to the [Display orientation] (see page 67) setting
([Landscape] / [Portrait]).
●
When [User image] is selected, the image does not
rotate according to the [Display orientation] setting.
Prepare an image of 1 920 x 1 080 aspect ratio
compatible with the installation direction.
● [Default image] of [No signal image settings] is the
Panasonic logo (black background).
[Read user image]
Register the image read from a USB memory device.
[Read user image] - submenu screen
Read user image
Select a no signal image.
usb/picture/
..
0_folder_sample
g_sample
z_sample
1sample.jpg
2sample.jpg
3sample.jpg
a_sample.jpg
j_sample.jpg
v_sample.jpg
On
User image
Note
● Set the input to something other than [USB] or
[MEMORY VIEWER], and read the image.
● One user image can be registered for [Startup
image settings] and [No signal image settings]
respectively.
●
Do not turn the power off while reading the user
image.
●
The selected image is previewed on the [Read
user image] submenu screen.
●
When USB memory device is not connected to the
USB terminal, [Read user image] is greyed out and
cannot be selected.
●
If starting to read the image while creating the
preview image, an access error will occur, and the
image may not be recognized as a image file.
Confirm the preview image display, and then start
reading process.
●
The displayed file names are restricted as follows.
Applicable extension: jpg, jpe, jpeg or bmp
•
The file name is not ".jpg", ".jpe", ".jpeg", or
•
".bmp" which start with dot (.).
●
Depending on the OS setting, folders or files in the
USB memory invisible on your computer may be
displayed on this unit.
[Clear user image]
Clears the image read in [Read user image].
[Startup image settings] - submenu screen
Startup image settings
Display setting
Image select User image
Read user image
Clear user image
Note
●
When there is no [User image] that have been
read, [Clear user image] is greyed out and cannot
be selected.
●
When [Image select] is set to [User image],
performing [Clear user image] will change the
setting of [Image select] to [Default image].
On
English
55