Table of Contents
Advertisement
●
If [Multi display settings] is specified in the schedule
data of "Content Management Software", the setting
is switched to the specified multi screen. [Multi display
settings] cannot be changed during the specified
schedule playback. When the specified schedule
has finished, [Multi display settings] is restored to the
state before setting.
■
Caption display
A caption is displayed at the time set for the schedule
data.
Note
●
The caption is displayed on top of an image.
●
A maximum of 600 characters can be displayed with
caption.
●
Scrolling of the caption may stop at switching timing
of content playback or music playback.
●
The caption is hidden by switching input. If the input
is switched with the schedule playback function, the
caption display continues.
Also, if the schedule playback function is resumed,
the caption is displayed from the beginning.
●
Changing the settings of [OSD language], [Display
orientation] or [Image rotation], or displaying the
display ID/display name will delete the caption being
displayed.
●
When creating schedule data, if a caption with many
characters is displayed with [Scroll] set to [No], the
characters will run over on the screen.
●
The caption does not synchronize with other displays
even if [Play mode] is [Synchronize play].
■
LightID transmission
Sends a specified LightID at the time set for the
schedule data.
Note
●
If [Setup] - [LightID] is set to [Off], the LightID is not
sent.
●
If [LightID] is set to [External control] during schedule
playback, the LightID transmission will start from the
next schedule.
●
If LightID transmission is specified with a function
other that the schedule playback function during the
scheduled period, a LightID specified later is sent.
●
LightID transmission will stop when the schedule time
for which LightID is not set comes.
●
Removing the USB memory device will stop the
LightID transmission.
■
Disabled functions
The following main unit's functions are set to [Disable
(Off)] during schedule play mode.
●
[Set up timer]
●
[Screensaver]
●
"Power management" function
●
[No signal power off]
●
[HDMI-CEC settings]
●
[No activity power off]
●
[Menu transparency]
●
[Image settings] (Reading user image is disabled.)
●
[Input search]
●
[Initial input]
●
[Input lock]
●
[Failover/Failback]
Note
●
Disabled functions are greyed out on the on-screen
menu. Also, serial commands are in [ER401] state
(Including the inquiry command).
●
During schedule play mode, disabled functions
are set to [Disable (Off)], and those operations are
forcibly stopped.
●
If schedule play mode has finished by removing
the USB memory, etc., the disabled functions are
restored to the original setting values.
●
For [Multi display settings], only [Horizontal scale],
[Vertical scale] and [Location] can be set. [Bezel H
adjustment] and [Bezel V adjustment] cannot be set.
■
Resume play
Sets the operation when the schedule playback is
restored again after schedule play mode is stopped
once.
When set to [On]:
The previous content before schedule play mode is
stopped is played back from the beginning.
When set to [Off]:
The playlist scheduled to be played back at the
current time is played back from the beginning.
Note
●
When playback is scheduled in the synchronized
playback mode, the playback is performed according
to the set time in both [On] and [Off] cases.
107
English
Advertisement
Table of Contents
